Sansa C200v2 bootloader 1.0

[ranma]

http://tdiedrich.de/~ranma/rockbox-c200v2/bootloader-c200v2-v1.0.sansa
SHA1: 383900cbabded16e2bebb8f43fc85ebca5cdb332
(Built from svn r26782)

Tested as working on my C200v2.  We would like owners of a C200v2 to test this to confirm its working on all HW revisions.

[tdb]

Hi,

Would love to test it for you. I am not a dev though (or previous tester) so I am no expert and might not be the person you are looking for.
I have dl the latest c200v2 rockbox build, but I don't know what to do with your sansa file. If you can direct me to a how-to that makes sense to a non-dev I might be able to assist.

Thanks,
Tedb

[saratoga]

Just follow the install directions:

http://www.rockbox.org/wiki/SansaAMS#Installation_for_Unusable_other

And use this bootloader.

[tdb]

Just follow the install directions:

http://www.rockbox.org/wiki/SansaAMS#Installation_for_Unusable_other

And use this bootloader.

Thanks Saratoga, just created the .bin file with mkamsboot. Battery was low so I will need to charge first, will try tomorrow.

[tdb]

Just installed the bootloader + rockbox. Seems to be working fine, I can also access the sd card.
I have a refurbished C240 US model.


 

[seani]

http://tdiedrich.de/~ranma/rockbox-c200v2/bootloader-c200v2-v1.0.sansa
SHA1: 383900cbabded16e2bebb8f43fc85ebca5cdb332
(Built from svn r26782)

Tested as working on my C200v2.  We would like owners of a C200v2 to test this to confirm its working on all HW revisions.

Working on a 2Gb C250 refurb

Submodel
C200v2 variant 0

[tenciter]

Not working on my C250 refurb

I get this error:

Loading firmware
Length: 8A764
Checksum: 371F356
Model name: e2v2
Loading rockbox.sansa
Sum: 371F359
Bad checksum

Dunno what my variant is?

[funman]

Model name: e2v2

You installed an e200v2 build.

[tenciter]

Whoops, you're right.

I installed the c200v2 build and it seems to be working great.

Thanks.

[betodj]

Just follow the install directions:

http://www.rockbox.org/wiki/SansaAMS#Installation_for_Unusable_other

And use this bootloader.

Hi.. 
 
 I need some help.. see I´m a total noob on this thing rockbox and I want it in my sansa I have a c250v2  but i dont understand the instructions that the site gave ..  Everything is alright until: .. Usage (example for clip): ./mkamsboot m300a.bin bootloader-clip.sansa output.bin ........then it says that copy the ouput file to the root   
 
but what file?  i dont understand this part...  then  when this is done.. how do I install the rockbox build? that says in the last point, cause this is only the bootloader isn´t it?
 
Hope you can help me.
 
Greetings.

[Chronon]

The first argument is the SanDisk firmware file, the second is the Rockbox bootloader and output.bin should be the output file. 

[manotroll]

I use the version-c2x0v2 rockbox-20100407-backlightpatch
compiled by ranma
this version on this site and that but now this?
and to update the bootloader?

eu uso a versão rockbox-c2x0v2-backlightpatch-20100407
copilada  por ranma
esta versão que esta no site e mas atual que esta ?
e necessário atualizar o bootloader ?

[Chronon]

Just follow the install directions:

http://www.rockbox.org/wiki/SansaAMS#Installation_for_Unusable_other

And use this bootloader.

[manotroll]

I had downloaded the version
but not changed the bootloader have to update it too?

eu tinha baixado a versão
mas não alterei o bootloader tem que atualiza lo também ?

[Chronon]

The file linked in the first post is a bootloader.