Rockbox Technical Forums

Installation / Removal => Manual Installation => Iriver - Installation/Removal/Flashing => Topic started by: BitBucket on April 16, 2007, 09:42:02 PM

Title: Unable to boot to original firmware on H320
Post by: BitBucket on April 16, 2007, 09:42:02 PM
Hi!

I decided to take the plunge and switch to ROCKbox for my H320.

I have just installed ROCKbox r13184-070416, and it will not boot to the original firmware.

I patched the 1.29K version of the firmware and installed using this.

My H320 boots into ROCKbox fine, but when I hold down the rec key and start it up it just flashes (quickly)
'starting original firmware...'
then shuts down.

Can anyone give me a clue (I know I need one)

Title: Re: Unable to boot to original firmware on H320
Post by: Didgeridoohan on April 16, 2007, 10:04:12 PM
Do you press and hold both buttons until the original firmware starts up? Unless you do that, you get exactly the behavior you describe...

Cheers!
Title: Re: Unable to boot to original firmware on H320
Post by: BitBucket on April 16, 2007, 10:11:26 PM
THANKS!!!!

This solved my problem.


Boy am I a dill!
Title: Re: Unable to boot to original firmware on H320
Post by: halljames on May 23, 2007, 05:10:22 AM
Thank god I found this post as I was having the same problem.

Not that I ever want to use the original firmware after finding rockbox