Rockbox Technical Forums

Installation / Removal => Manual Installation => Sandisk - Installation/Removal => Topic started by: bangkok on November 11, 2007, 07:09:31 AM

Title: Rockbox installation Sandisk e200
Post by: bangkok on November 11, 2007, 07:09:31 AM
hello!
After I took down the firmware file To my computer,The file arrives by the formation of zip.
If extrication of the file will do in the main folder (root) of the device,
or
I  extricate the zip file In my computer And passes the extrication files to  the main folder (root) of the device?

If after this action I Installs the patcher?

thank you very much




Title: Re: Rockbox installation Sandisk e200
Post by: frause on November 11, 2007, 09:51:49 AM
...Yes?

I'm not quite understanding what you are asking, but is sounds like you've understood the instructions for installing Rockbox correctly.

Does the installation fail for you in some way. If so, at what step?
Title: Re: Rockbox installation Sandisk e200
Post by: bangkok on November 11, 2007, 11:35:55 AM
Hello!
Thanks for that answered my letter.
I wanted to know what is the version that is the best to the device sandisk e205?
I wanted to know from where lower fotnim in Hebrew?
In case of malfunction is it possible to return to the version of source of the device?

thank you very much
Title: Re: Rockbox installation Sandisk e200
Post by: frause on November 11, 2007, 11:56:04 AM
I wanted to know what is the version that is the best to the device sandisk e205?
I wanted to know from where lower fotnim in Hebrew?
In case of malfunction is it possible to return to the version of source of the device?

1) Download a current build. There is a link on the left side on every page on the rockbox site. Or use Rockbox Utility (http://www.rockbox.org/twiki/bin/view/Main/RockboxUtilityQt). It will install everything with a few mouse clicks.

2) I have no idea. I'm not even sure I understand the question.

3) Yes, it is. There is information in the wiki about recovery. If you follow the installation instructions or use Rockbox Utility there should not be a need for that, though.
Title: Re: Rockbox installation Sandisk e200
Post by: bangkok on November 11, 2007, 01:28:34 PM
Hi
I need Hebrew font.


Then as I understood
I must change setting to MSC Before beginning of the process.
Later I am a connect the player to the computer via USB.
later I installers firmware And extricate the files in the player.
And in the end I install the pache.
I disconnect the player from the computer via USB.
I return to the setting to USB.
If this is end of the process or  there is more installation?

I need Hebrew font.

Thank you very much you


Title: Re: Rockbox installation Sandisk e200
Post by: frause on November 11, 2007, 04:25:25 PM
I return to the setting to USB.
If this is end of the process or  there is more installation?

I need Hebrew font.

Not sure what you mean by "return to the setting to USB". You probably should leave the transfer mode setting on "MSC", but I'm not sure if it really matters.

You will also want to install the font package from http://www.rockbox.org/daily.shtml.

There seems to be fonts with hebrew characters judging from this wiki page: http://www.rockbox.org/twiki/bin/view/Main/UnicodeFonts. They are included in the font package.