Recent Posts
1
Rockbox General Discussion / Re: Anyone still scrobbling in 2022?
« Last post by automusician on Today at 10:39:36 AM »Another little bug: if you have a track-number zero, you get a missing track number on the scrobbler.
Results in
Code: [Select]
$ metaflac --show-tag TRACKNUMBER 00\ The\ Real\ Song\ for\ the\ Deaf.flac
TRACKNUMBER=0
Results in
Code: [Select]
Queens of the Stone Age Songs For The Deaf The Real Song for the Deaf 93 S 1728570128 cee0b9f8-7ffd-4582-ac5a-ed0a8dc05015
In case it's hard to spot: between the track name and the length (93), there's no track number. My scrobbler script doesn't like it, but I'm not sure it's valid for the format to have no track number, and 0 seems valid enough for me. Many CDs have a https://en.wikipedia.org/wiki/Pregap at 0, though.2
Olympus - Installation/Removal / Re: M.ROBE 500 - RockBox boot problems
« Last post by speachy on October 11, 2024, 02:35:41 PM »Where is this file located inside a build ?
It's produced as part of the build process, but is not included in the .zip file.
3
Olympus - Installation/Removal / Re: M.ROBE 500 - RockBox boot problems
« Last post by asper on October 11, 2024, 02:22:12 PM »Where is this file located inside a build ?Dunno if this is what you were looking for: https://workupload.com/file/PEaSuJLyhvr
I should have been more specific; I need the 'rockbox.elf' files from those two builds. That has the full set of symbols so I can see how each got laid out.
4
Olympus - Installation/Removal / Re: M.ROBE 500 - RockBox boot problems
« Last post by speachy on October 11, 2024, 11:12:23 AM »Dunno if this is what you were looking for: https://workupload.com/file/PEaSuJLyhvr
I should have been more specific; I need the 'rockbox.elf' files from those two builds. That has the full set of symbols so I can see how each got laid out.
5
Olympus - Installation/Removal / Re: M.ROBE 500 - RockBox boot problems
« Last post by asper on October 11, 2024, 10:53:28 AM »Keep in mind that particular commit is over five years old, and even pre-dates the 3.15 release.
And the "broken" commit points at there being some sort of link order problem that appears to only affect the mrobe500, not the other tms320dm320 targets (eg zen vision m and sansa connect).
Can someone send me the elf files of the working build and the one that doesn', so I can poke around?
Dunno if this is what you were looking for: https://workupload.com/file/PEaSuJLyhvr
6
Other - Installation/Removal / Re: Surfans F20 v3.4 - jztool doesn't seem to activate the screen
« Last post by jdharper on October 10, 2024, 01:27:59 PM »So far everything seems to be working correctly--loaded up the music database, and audio plays through both headphones and the Line Out port. Buttons all do what I expect them to do.
7
Other - Installation/Removal / Re: Surfans F20 v3.4 - jztool doesn't seem to activate the screen
« Last post by dconrad on October 10, 2024, 12:49:33 PM »Looks like they have not changed the dac, that's good. The headphone/lineout detect lines may be direct to the processor now rather than going through the axp now...?
8
Other - Installation/Removal / Re: Surfans F20 v3.4 - jztool doesn't seem to activate the screen
« Last post by dconrad on October 10, 2024, 12:29:24 PM »
Lots of good info in there, it appears we may have a different AXP unit, and I didn't realize dmesg would print out gpio locations for us, I can double check them against what we already have to make sure they didnt change. 9
Feature Ideas / Re: Double click = go to the next folder
« Last post by bahus on October 10, 2024, 12:20:42 PM »It's click + long click (works both for next/prev button)
10
Other - Installation/Removal / Re: Surfans F20 v3.4 - jztool doesn't seem to activate the screen
« Last post by jdharper on October 10, 2024, 12:15:54 PM »Ah ha, success! Rockbox starts correctly now! I'll test it out and let you know if anything else weird happens.
Thanks for your help! Here's the requested output:
PS C:\Users\JD\Downloads\platform-tools-latest-windows\platform-tools> .\adb shell dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.14 (fkp@Android-Server) (gcc version 4.7.2 (Ingenic 2015.02) ) #1 PREEMPT Fri Aug 23 15:38:35 CST 2024
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 RESET ERROR PC:801E7F24
[ 0.000000] [<801e7f24>] __delay+0x4/0x10
[ 0.000000] CPU0 revision is: 2ed1024f (Ingenic Xburst)
[ 0.000000] FPU revision is: 00330000
[ 0.000000] CCLK:1008MHz L2CLK:504Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 004d5000 @ 00010000 (usable)
[ 0.000000] memory: 0003b000 @ 004e5000 (usable after init)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 804e2c20, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 16kB, 4-way, VIPT, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS2,115200n8 mem=32M@0x0 no_console_suspend lpj=5009408 ip=off init=/linuxrc ubi.mtd=4 root=ubi0:rootfs ubi.mtd=5 rootfstype=ubifs sn_no=00000000000000000000000000000000 bt_mac=425430003412 wifi_mac=xxxxxxxxxxxx rw
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 26628k/32768k available (3820k kernel code, 6140k reserved, 1124k data, 236k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] clockevents_config_and_register success.
[ 0.000000] Console: colour dummy device 80x25
[ 0.004648] Calibrating delay loop (skipped) preset value.. 1001.88 BogoMIPS (lpj=5009408)
[ 0.013031] pid_max: default: 32768 minimum: 301
[ 0.018054] Mount-cache hash table entries: 512
[ 0.023848] Initializing cgroup subsys devices
[ 0.028433] Initializing cgroup subsys freezer
[ 0.032863] Initializing cgroup subsys blkio
[ 0.042210] regulator-dummy: no parameters
[ 0.046988] NET: Registered protocol family 16
[ 0.069164] bio: create slab <bio-0> at 0
[ 0.075442] jz-dma jz-dma: JZ SoC DMA initialized
[ 0.080967] SCSI subsystem initialized
[ 0.084862] usbcore: registered new interface driver usbfs
[ 0.090669] usbcore: registered new interface driver hub
[ 0.096385] usbcore: registered new device driver usb
[ 0.101725] (null): set:999 hold:1000 dev=100000000 h=2000 l=2000
[ 0.108684] (null): set:249 hold:250 dev=100000000 h=500 l=500
[ 0.821339] sa ok
[ 0.823456] Advanced Linux Sound Architecture Driver Initialized.
[ 0.830466] Bluetooth: Core ver 2.16
[ 0.834139] NET: Registered protocol family 31
[ 0.838681] Bluetooth: HCI device and connection manager initialized
[ 0.845093] Bluetooth: HCI socket layer initialized
[ 0.850001] Bluetooth: L2CAP socket layer initialized
[ 0.855198] Bluetooth: SCO socket layer initialized
[ 0.860279] The GPIO 85 is request
[ 0.863669] The GPIO 85 is request
[ 0.867164] The GPIO 85 is request
[ 0.870693] axp20x-i2c 2-0034: AXP20x variant AXP2101 found
[ 0.880217] axp20x-i2c 2-0034: AXP20X driver loaded
[ 0.885423] Switching to clocksource jz_clocksource
[ 0.890836] FS-Cache: Loaded
[ 0.901207] jz-dwc2 jz-dwc2: regulator vbus get error
[ 0.906337] DWC IN OTG MODE
[ 1.060733] dwc2 dwc2: Keep PHY ON
[ 1.064111] dwc2 dwc2: Using Buffer DMA mode
[ 1.068440] dwc2 dwc2: Core Release: 3.00a
[ 1.072699] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller
[ 1.079023] dwc2 dwc2: new USB bus registered, assigned bus number 1
[ 1.086761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.093758] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.101034] usb usb1: Product: DesignWare USB2.0 High-Speed Host Controller
[ 1.108076] usb usb1: Manufacturer: Linux 3.10.14 dwc2-hcd
[ 1.113658] usb usb1: SerialNumber: dwc2
[ 1.118247] hub 1-0:1.0: USB hub found
[ 1.122119] hub 1-0:1.0: 1 port detected
[ 1.126421] dwc2 dwc2: DWC2 Host Initialized
[ 1.131594] dwc2 dwc2: enter dwc2_gadget_plug_change:2690: plugin = 1 pullup_on = 0 suspend = 0
[ 1.140778] NET: Registered protocol family 1
[ 1.145935] 359,init_ddr_proc
[ 1.157252] NTFS driver 2.1.30 [Flags: R/O].
[ 1.162186] fuse init (API version 7.22)
[ 1.166803] exFAT: Version 1.2.9
[ 1.170247] msgmni has been set to 52
[ 1.178582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.186336] io scheduler noop registered
[ 1.190236] io scheduler deadline registered
[ 1.194990] io scheduler cfq registered (default)
[ 1.200008] gpio_request GPIO 45 , name lcd rst
[ 1.204929] gpio_request GPIO 89 , name BL PWR
[ 1.209566] pwm-backlight pwm-backlight.0: unable to request PWM, trying legacy API
[ 1.221215] jz-fb jz-fb: Frame buffer size: 307200 bytes
[ 1.222543] DCDC1: 1500 <--> 3400 mV at 3300 mV
[ 1.228471] DCDC2: 500 <--> 1540 mV at 1200 mV
[ 1.234443] DCDC3: 500 <--> 3400 mV at 2800 mV
[ 1.240485] DCDC4: 500 <--> 1840 mV at 1800 mV
[ 1.246235] DCDC5: 1200 <--> 1630 mV at 1400 mV
[ 1.251831] LDO1: 1800 mV
[ 1.254776] LDO2: 1800 mV
[ 1.258184] LDO3: 500 <--> 3500 mV at 2500 mV
[ 1.264104] LDO4: 500 <--> 3500 mV at 3300 mV
[ 1.269882] LDO5: 500 <--> 3500 mV at 3300 mV
[ 1.275710] LDO6: 500 <--> 3500 mV at 3300 mV
[ 1.281474] LDO7: 500 <--> 3500 mV at 3300 mV
[ 1.287209] LDO8: 500 <--> 3500 mV at 3300 mV
[ 1.293063] LDO9: 500 <--> 3300 mV at 2500 mV
[ 1.298877] LDO10: 500 <--> 1400 mV at 1250 mV
[ 1.304737] LDO11: 500 <--> 1400 mV at 500 mV
[ 1.313294] jz-uart.0: ttyS0 at MMIO 0x10030000 (irq = 59) is a uart0
[ 1.320133] jz-uart.2: ttyS2 at MMIO 0x10032000 (irq = 57) is a uart2
[ 1.328254] console [ttyS2] enabled, bootconsole disabled
[ 1.340035] register vprivilege driver OK! Major = 252
[ 1.345613] register vprivilege driver OK! Major = 251
[ 1.351526] gpio_request GPIO 82 , name bt_reg_on
[ 1.356583] gpio_request GPIO 84 , name bt_wake_host
[ 1.361985] gpio_request GPIO 83 , name host_wake_bt
[ 1.367750] usb_tcs1421_gpio_probe
[ 1.371386] gpio_request GPIO 62 , name USB_TCS1421_CFG1
[ 1.377042] gpio_request GPIO 101 , name USB_TCS1421_CFG0
[ 1.392774] default mode:NormalDRP
[ 1.397900] nand_magic=0x6e616e64sfcnand num=9
[ 1.402686] Scanning device for bad blocks
[ 1.492456] Creating 6 MTD partitions on "sfc_nand":
[ 1.497590] 0x000000000000-0x000000080000 : "uboot"
[ 1.503384] ftl_cs: FTL header not found.
[ 1.508448] 0x000000080000-0x000000300000 : "logo"
[ 1.514608] ftl_cs: FTL header not found.
[ 1.519592] 0x000000300000-0x000000900000 : "kernel"
[ 1.525930] ftl_cs: FTL header not found.
[ 1.531012] 0x000000900000-0x000001000000 : "recovery"
[ 1.537378] ftl_cs: FTL header not found.
[ 1.542478] 0x000001000000-0x000005000000 : "rootfs"
[ 1.548706] ftl_cs: FTL header not found.
[ 1.553826] 0x000005000000-0x000008000000 : "data"
[ 1.559854] ftl_cs: FTL header not found.
[ 1.565225] usbcore: registered new interface driver usb-storage
[ 1.572344] gpio_request GPIO 55 , name ring1_gpio
[ 1.577618] gpio_request GPIO 56 , name ring2_gpio
[ 1.583257] input: sa-ring-keys as /devices/platform/sa-ring-keys/input/input0
[ 1.591960] jz-rtc jz-rtc.0: rtc core: registered jz-rtc as rtc0
[ 1.601826] pdata->chgtermcur:125
[ 1.605253] prop:125
[ 1.610743] axp2101_charger: read chipid = 4a
[ 1.610743]
[ 1.644350] Bluetooth: HCI UART driver ver 2.2
[ 1.649315] Bluetooth: HCI H4 protocol initialized
[ 1.654463] Bluetooth: HCI BCSP protocol initialized
[ 1.659628] Bluetooth: HCILL protocol initialized
[ 1.664779] jzmmc_probe,1864 pdata=81868f80
[ 1.669468] jzmmc_gpio_init 1753 card_gpio->cd.num =43
[ 1.675037] gpio_request GPIO 42 , name mmc_power
[ 1.692062] drivers/mmc/host/jzmmc_v12.c,jzmmc_power_on,355
[ 1.697824] drivers/mmc/host/jzmmc_v12.c,jzmmc_power_on,367
[ 1.703682] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0
[ 1.709916] drivers/mmc/host/jzmmc_v12.c,jzmmc_power_on,369
[ 1.850417] jzmmc_v1.2 jzmmc_v1.2.0: register success!
[ 1.856161] usbcore: registered new interface driver usbhid
[ 1.862024] usbhid: USB HID core driver
[ 1.866392] sa_information_init success
[ 1.870928] usbcore: registered new interface driver snd-usb-audio
[ 1.878096] jz-asoc-dma jz-asoc-aic-dma: Audio dma platfrom probe success
[ 1.885316] jz-asoc-dma jz-asoc-pcm-dma: Audio dma platfrom probe success
[ 1.893348] jz-asoc-aic jz-asoc-aic: Aic core probe success
[ 1.899370] jz-asoc-aic-i2s jz-asoc-aic-i2s: i2s platform probe success
[ 1.906674] jz-asoc-pcm jz-asoc-pcm: pcm platform probe success
[ 1.913438] gpio_request GPIO 46 , name headphone
[ 1.918563] gpio_request GPIO 54 , name lineout
[ 1.923545] SWITCH: init OK
[ 1.927936] dma dma0chan4: Channel 4 have been requested.(phy id 3,type 0x06 desc a1a8d000)
[ 1.954016] ingenic-erosq ingenic-erosq.0: es9018_k2m-hifi <-> jz-asoc-aic-i2s mapping ok
[ 1.963282] dma dma0chan2: Channel 2 have been requested.(phy id 5,type 0x20 desc a1a90000)
[ 1.989084] ingenic-erosq ingenic-erosq.0: es9018_k2m-hifi <-> jz-asoc-pcm mapping ok
[ 1.998848] gpio_request GPIO 40 , name hp mute
[ 2.003848] gpio_request GPIO 38 , name po pwr
[ 2.008609] gpio_request GPIO 47 , name lo mute
[ 2.013475] gpio_request GPIO 41 , name lo pwr
[ 2.018234] gpio_request GPIO 44 , name dac mute
[ 2.023189] gpio_request GPIO 53 , name spdif pwr
[ 2.028217] gpio_request GPIO 37 , name out select
[ 2.033622] NET: Registered protocol family 17
[ 2.038708] Bluetooth: RFCOMM TTY layer initialized
[ 2.044085] Bluetooth: RFCOMM socket layer initialized
[ 2.049391] Bluetooth: RFCOMM ver 1.11
[ 2.053311] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.058784] Bluetooth: BNEP filters: protocol multicast
[ 2.064195] Bluetooth: BNEP socket layer initialized
[ 2.069311] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.075443] Bluetooth: HIDP socket layer initialized
[ 2.085467] LDO7: incomplete constraints, leaving on
[ 2.092126] LDO3: incomplete constraints, leaving on
[ 2.098244] DCDC4: incomplete constraints, leaving on
[ 2.104386] DCDC2: incomplete constraints, leaving on
[ 2.110092] DCDC1: incomplete constraints, leaving on
[ 2.116145] UBI: attaching mtd4 to ubi0
[ 2.260889] UBI: scanning is finished
[ 2.272143] UBI: attached mtd4 (name "rootfs", size 64 MiB) to ubi0
[ 2.278623] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.285755] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.292681] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.299763] UBI: good PEBs: 512, bad PEBs: 0, corrupted PEBs: 0
[ 2.305881] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 2.313253] UBI: max/mean erase counter: 9/3, WL threshold: 4096, image sequence number: 66554484
[ 2.322495] UBI: available PEBs: 0, total reserved PEBs: 512, PEBs reserved for bad PEB handling: 20
[ 2.331942] UBI: background thread "ubi_bgt0d" started, PID 41
[ 2.338018] UBI: attaching mtd5 to ubi1
[ 2.446535] UBI: scanning is finished
[ 2.457382] UBI: attached mtd5 (name "data", size 48 MiB) to ubi1
[ 2.463830] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.470845] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.477749] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.484850] UBI: good PEBs: 384, bad PEBs: 0, corrupted PEBs: 0
[ 2.490967] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 2.498323] UBI: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 4167983187
[ 2.507661] UBI: available PEBs: 0, total reserved PEBs: 384, PEBs reserved for bad PEB handling: 20
[ 2.517099] UBI: background thread "ubi_bgt1d" started, PID 42
[ 2.523737] file system registered
[ 2.528918] using random self ethernet address
[ 2.533741] using random host ethernet address
[ 2.538850] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.546077] android_usb gadget: Number of LUNs=1
[ 2.550861] lun0: LUN: removable file: (no medium)
[ 2.556566] android_usb gadget: android_usb ready
[ 2.562437] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 2.570013] jz-rtc jz-rtc.0: setting system clock to 2014-08-22 03:03:31 UTC (1408676611)
[ 2.578572] ALSA device list:
[ 2.581651] #0: erosq
[ 2.587887] UBIFS: background thread "ubifs_bgt0_0" started, PID 45
[ 2.647408] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.653742] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.663175] UBIFS: FS size: 60567552 bytes (57 MiB, 477 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.673138] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.678351] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 5A955288-026B-4B97-9034-0D2EF4C249B3, small LPT model
[ 2.690181] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.698493] Freeing unused kernel memory: 236K (804e5000 - 80520000)
[ 2.751046] mmc0: new high speed SDHC card at address 0001
[ 2.758369] mmcblk0: mmc0:0001 EITSD 29.1 GiB
[ 2.768906] mmcblk0:
[ 3.334412] FAT-fs (mmcblk0): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 3.350307] FAT-fs (mmcblk0): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.540907] UBIFS: background thread "ubifs_bgt1_0" started, PID 76
[ 3.622440] UBIFS: mounted UBI device 1, volume 0, name "data_vol"
[ 3.628835] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 3.638462] UBIFS: FS size: 44441600 bytes (42 MiB, 350 LEBs), journal size 2285568 bytes (2 MiB, 18 LEBs)
[ 3.648602] UBIFS: reserved for root: 2099086 bytes (2049 KiB)
[ 3.654755] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E48E93B2-9430-4E52-9816-86A35E020AD4, small LPT model
[ 4.051373] gpio_request GPIO 58 , name rtc32k
[ 5.055135] clear SIGNATURE
[ 5.338499] graphics fb0: open count : 1
[ 5.373165] jz-fb jz-fb: the slcd slcd_cfg_new is 00000200
[ 6.750597] DWC USB connect
[ 6.760631] dwc2 dwc2: enter dwc2_gadget_plug_change:2690: plugin = 1 pullup_on = 0 suspend = 0
[ 6.801090] android_usb: already disabled
[ 6.806747] adb_bind_config
[ 6.971338] android_work: sent uevent USB_STATE=CONNECTED
[ 6.986108] android_usb gadget: high-speed config #1: android
[ 6.994502] android_work: sent uevent USB_STATE=CONFIGURED
[ 7.020865] adb_open
PS C:\Users\JD\Downloads\platform-tools-latest-windows\platform-tools> .\adb shell amixer contents
numid=3,iface=MIXER,name='ES9018_K2M Digital Filter'
; type=INTEGER,access=rw------,values=1,min=0,max=4,step=0
: values=0
numid=1,iface=MIXER,name='Left Playback Volume'
; type=INTEGER,access=rw------,values=1,min=0,max=255,step=0
: values=0
numid=4,iface=MIXER,name='Output Port Switch'
; type=INTEGER,access=rw------,values=1,min=0,max=5,step=0
: values=0
numid=2,iface=MIXER,name='Right Playback Volume'
; type=INTEGER,access=rw------,values=1,min=0,max=255,step=0
: values=0
numid=5,iface=MIXER,name='isDSD'
; type=BOOLEAN,access=rw------,values=1
: values=off
Thanks for your help! Here's the requested output:
PS C:\Users\JD\Downloads\platform-tools-latest-windows\platform-tools> .\adb shell dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.14 (fkp@Android-Server) (gcc version 4.7.2 (Ingenic 2015.02) ) #1 PREEMPT Fri Aug 23 15:38:35 CST 2024
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 RESET ERROR PC:801E7F24
[ 0.000000] [<801e7f24>] __delay+0x4/0x10
[ 0.000000] CPU0 revision is: 2ed1024f (Ingenic Xburst)
[ 0.000000] FPU revision is: 00330000
[ 0.000000] CCLK:1008MHz L2CLK:504Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 004d5000 @ 00010000 (usable)
[ 0.000000] memory: 0003b000 @ 004e5000 (usable after init)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 804e2c20, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 16kB, 4-way, VIPT, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS2,115200n8 mem=32M@0x0 no_console_suspend lpj=5009408 ip=off init=/linuxrc ubi.mtd=4 root=ubi0:rootfs ubi.mtd=5 rootfstype=ubifs sn_no=00000000000000000000000000000000 bt_mac=425430003412 wifi_mac=xxxxxxxxxxxx rw
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 26628k/32768k available (3820k kernel code, 6140k reserved, 1124k data, 236k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] clockevents_config_and_register success.
[ 0.000000] Console: colour dummy device 80x25
[ 0.004648] Calibrating delay loop (skipped) preset value.. 1001.88 BogoMIPS (lpj=5009408)
[ 0.013031] pid_max: default: 32768 minimum: 301
[ 0.018054] Mount-cache hash table entries: 512
[ 0.023848] Initializing cgroup subsys devices
[ 0.028433] Initializing cgroup subsys freezer
[ 0.032863] Initializing cgroup subsys blkio
[ 0.042210] regulator-dummy: no parameters
[ 0.046988] NET: Registered protocol family 16
[ 0.069164] bio: create slab <bio-0> at 0
[ 0.075442] jz-dma jz-dma: JZ SoC DMA initialized
[ 0.080967] SCSI subsystem initialized
[ 0.084862] usbcore: registered new interface driver usbfs
[ 0.090669] usbcore: registered new interface driver hub
[ 0.096385] usbcore: registered new device driver usb
[ 0.101725] (null): set:999 hold:1000 dev=100000000 h=2000 l=2000
[ 0.108684] (null): set:249 hold:250 dev=100000000 h=500 l=500
[ 0.821339] sa ok
[ 0.823456] Advanced Linux Sound Architecture Driver Initialized.
[ 0.830466] Bluetooth: Core ver 2.16
[ 0.834139] NET: Registered protocol family 31
[ 0.838681] Bluetooth: HCI device and connection manager initialized
[ 0.845093] Bluetooth: HCI socket layer initialized
[ 0.850001] Bluetooth: L2CAP socket layer initialized
[ 0.855198] Bluetooth: SCO socket layer initialized
[ 0.860279] The GPIO 85 is request
[ 0.863669] The GPIO 85 is request
[ 0.867164] The GPIO 85 is request
[ 0.870693] axp20x-i2c 2-0034: AXP20x variant AXP2101 found
[ 0.880217] axp20x-i2c 2-0034: AXP20X driver loaded
[ 0.885423] Switching to clocksource jz_clocksource
[ 0.890836] FS-Cache: Loaded
[ 0.901207] jz-dwc2 jz-dwc2: regulator vbus get error
[ 0.906337] DWC IN OTG MODE
[ 1.060733] dwc2 dwc2: Keep PHY ON
[ 1.064111] dwc2 dwc2: Using Buffer DMA mode
[ 1.068440] dwc2 dwc2: Core Release: 3.00a
[ 1.072699] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller
[ 1.079023] dwc2 dwc2: new USB bus registered, assigned bus number 1
[ 1.086761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.093758] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.101034] usb usb1: Product: DesignWare USB2.0 High-Speed Host Controller
[ 1.108076] usb usb1: Manufacturer: Linux 3.10.14 dwc2-hcd
[ 1.113658] usb usb1: SerialNumber: dwc2
[ 1.118247] hub 1-0:1.0: USB hub found
[ 1.122119] hub 1-0:1.0: 1 port detected
[ 1.126421] dwc2 dwc2: DWC2 Host Initialized
[ 1.131594] dwc2 dwc2: enter dwc2_gadget_plug_change:2690: plugin = 1 pullup_on = 0 suspend = 0
[ 1.140778] NET: Registered protocol family 1
[ 1.145935] 359,init_ddr_proc
[ 1.157252] NTFS driver 2.1.30 [Flags: R/O].
[ 1.162186] fuse init (API version 7.22)
[ 1.166803] exFAT: Version 1.2.9
[ 1.170247] msgmni has been set to 52
[ 1.178582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.186336] io scheduler noop registered
[ 1.190236] io scheduler deadline registered
[ 1.194990] io scheduler cfq registered (default)
[ 1.200008] gpio_request GPIO 45 , name lcd rst
[ 1.204929] gpio_request GPIO 89 , name BL PWR
[ 1.209566] pwm-backlight pwm-backlight.0: unable to request PWM, trying legacy API
[ 1.221215] jz-fb jz-fb: Frame buffer size: 307200 bytes
[ 1.222543] DCDC1: 1500 <--> 3400 mV at 3300 mV
[ 1.228471] DCDC2: 500 <--> 1540 mV at 1200 mV
[ 1.234443] DCDC3: 500 <--> 3400 mV at 2800 mV
[ 1.240485] DCDC4: 500 <--> 1840 mV at 1800 mV
[ 1.246235] DCDC5: 1200 <--> 1630 mV at 1400 mV
[ 1.251831] LDO1: 1800 mV
[ 1.254776] LDO2: 1800 mV
[ 1.258184] LDO3: 500 <--> 3500 mV at 2500 mV
[ 1.264104] LDO4: 500 <--> 3500 mV at 3300 mV
[ 1.269882] LDO5: 500 <--> 3500 mV at 3300 mV
[ 1.275710] LDO6: 500 <--> 3500 mV at 3300 mV
[ 1.281474] LDO7: 500 <--> 3500 mV at 3300 mV
[ 1.287209] LDO8: 500 <--> 3500 mV at 3300 mV
[ 1.293063] LDO9: 500 <--> 3300 mV at 2500 mV
[ 1.298877] LDO10: 500 <--> 1400 mV at 1250 mV
[ 1.304737] LDO11: 500 <--> 1400 mV at 500 mV
[ 1.313294] jz-uart.0: ttyS0 at MMIO 0x10030000 (irq = 59) is a uart0
[ 1.320133] jz-uart.2: ttyS2 at MMIO 0x10032000 (irq = 57) is a uart2
[ 1.328254] console [ttyS2] enabled, bootconsole disabled
[ 1.340035] register vprivilege driver OK! Major = 252
[ 1.345613] register vprivilege driver OK! Major = 251
[ 1.351526] gpio_request GPIO 82 , name bt_reg_on
[ 1.356583] gpio_request GPIO 84 , name bt_wake_host
[ 1.361985] gpio_request GPIO 83 , name host_wake_bt
[ 1.367750] usb_tcs1421_gpio_probe
[ 1.371386] gpio_request GPIO 62 , name USB_TCS1421_CFG1
[ 1.377042] gpio_request GPIO 101 , name USB_TCS1421_CFG0
[ 1.392774] default mode:NormalDRP
[ 1.397900] nand_magic=0x6e616e64sfcnand num=9
[ 1.402686] Scanning device for bad blocks
[ 1.492456] Creating 6 MTD partitions on "sfc_nand":
[ 1.497590] 0x000000000000-0x000000080000 : "uboot"
[ 1.503384] ftl_cs: FTL header not found.
[ 1.508448] 0x000000080000-0x000000300000 : "logo"
[ 1.514608] ftl_cs: FTL header not found.
[ 1.519592] 0x000000300000-0x000000900000 : "kernel"
[ 1.525930] ftl_cs: FTL header not found.
[ 1.531012] 0x000000900000-0x000001000000 : "recovery"
[ 1.537378] ftl_cs: FTL header not found.
[ 1.542478] 0x000001000000-0x000005000000 : "rootfs"
[ 1.548706] ftl_cs: FTL header not found.
[ 1.553826] 0x000005000000-0x000008000000 : "data"
[ 1.559854] ftl_cs: FTL header not found.
[ 1.565225] usbcore: registered new interface driver usb-storage
[ 1.572344] gpio_request GPIO 55 , name ring1_gpio
[ 1.577618] gpio_request GPIO 56 , name ring2_gpio
[ 1.583257] input: sa-ring-keys as /devices/platform/sa-ring-keys/input/input0
[ 1.591960] jz-rtc jz-rtc.0: rtc core: registered jz-rtc as rtc0
[ 1.601826] pdata->chgtermcur:125
[ 1.605253] prop:125
[ 1.610743] axp2101_charger: read chipid = 4a
[ 1.610743]
[ 1.644350] Bluetooth: HCI UART driver ver 2.2
[ 1.649315] Bluetooth: HCI H4 protocol initialized
[ 1.654463] Bluetooth: HCI BCSP protocol initialized
[ 1.659628] Bluetooth: HCILL protocol initialized
[ 1.664779] jzmmc_probe,1864 pdata=81868f80
[ 1.669468] jzmmc_gpio_init 1753 card_gpio->cd.num =43
[ 1.675037] gpio_request GPIO 42 , name mmc_power
[ 1.692062] drivers/mmc/host/jzmmc_v12.c,jzmmc_power_on,355
[ 1.697824] drivers/mmc/host/jzmmc_v12.c,jzmmc_power_on,367
[ 1.703682] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0
[ 1.709916] drivers/mmc/host/jzmmc_v12.c,jzmmc_power_on,369
[ 1.850417] jzmmc_v1.2 jzmmc_v1.2.0: register success!
[ 1.856161] usbcore: registered new interface driver usbhid
[ 1.862024] usbhid: USB HID core driver
[ 1.866392] sa_information_init success
[ 1.870928] usbcore: registered new interface driver snd-usb-audio
[ 1.878096] jz-asoc-dma jz-asoc-aic-dma: Audio dma platfrom probe success
[ 1.885316] jz-asoc-dma jz-asoc-pcm-dma: Audio dma platfrom probe success
[ 1.893348] jz-asoc-aic jz-asoc-aic: Aic core probe success
[ 1.899370] jz-asoc-aic-i2s jz-asoc-aic-i2s: i2s platform probe success
[ 1.906674] jz-asoc-pcm jz-asoc-pcm: pcm platform probe success
[ 1.913438] gpio_request GPIO 46 , name headphone
[ 1.918563] gpio_request GPIO 54 , name lineout
[ 1.923545] SWITCH: init OK
[ 1.927936] dma dma0chan4: Channel 4 have been requested.(phy id 3,type 0x06 desc a1a8d000)
[ 1.954016] ingenic-erosq ingenic-erosq.0: es9018_k2m-hifi <-> jz-asoc-aic-i2s mapping ok
[ 1.963282] dma dma0chan2: Channel 2 have been requested.(phy id 5,type 0x20 desc a1a90000)
[ 1.989084] ingenic-erosq ingenic-erosq.0: es9018_k2m-hifi <-> jz-asoc-pcm mapping ok
[ 1.998848] gpio_request GPIO 40 , name hp mute
[ 2.003848] gpio_request GPIO 38 , name po pwr
[ 2.008609] gpio_request GPIO 47 , name lo mute
[ 2.013475] gpio_request GPIO 41 , name lo pwr
[ 2.018234] gpio_request GPIO 44 , name dac mute
[ 2.023189] gpio_request GPIO 53 , name spdif pwr
[ 2.028217] gpio_request GPIO 37 , name out select
[ 2.033622] NET: Registered protocol family 17
[ 2.038708] Bluetooth: RFCOMM TTY layer initialized
[ 2.044085] Bluetooth: RFCOMM socket layer initialized
[ 2.049391] Bluetooth: RFCOMM ver 1.11
[ 2.053311] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.058784] Bluetooth: BNEP filters: protocol multicast
[ 2.064195] Bluetooth: BNEP socket layer initialized
[ 2.069311] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.075443] Bluetooth: HIDP socket layer initialized
[ 2.085467] LDO7: incomplete constraints, leaving on
[ 2.092126] LDO3: incomplete constraints, leaving on
[ 2.098244] DCDC4: incomplete constraints, leaving on
[ 2.104386] DCDC2: incomplete constraints, leaving on
[ 2.110092] DCDC1: incomplete constraints, leaving on
[ 2.116145] UBI: attaching mtd4 to ubi0
[ 2.260889] UBI: scanning is finished
[ 2.272143] UBI: attached mtd4 (name "rootfs", size 64 MiB) to ubi0
[ 2.278623] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.285755] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.292681] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.299763] UBI: good PEBs: 512, bad PEBs: 0, corrupted PEBs: 0
[ 2.305881] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 2.313253] UBI: max/mean erase counter: 9/3, WL threshold: 4096, image sequence number: 66554484
[ 2.322495] UBI: available PEBs: 0, total reserved PEBs: 512, PEBs reserved for bad PEB handling: 20
[ 2.331942] UBI: background thread "ubi_bgt0d" started, PID 41
[ 2.338018] UBI: attaching mtd5 to ubi1
[ 2.446535] UBI: scanning is finished
[ 2.457382] UBI: attached mtd5 (name "data", size 48 MiB) to ubi1
[ 2.463830] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.470845] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.477749] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.484850] UBI: good PEBs: 384, bad PEBs: 0, corrupted PEBs: 0
[ 2.490967] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 2.498323] UBI: max/mean erase counter: 5/3, WL threshold: 4096, image sequence number: 4167983187
[ 2.507661] UBI: available PEBs: 0, total reserved PEBs: 384, PEBs reserved for bad PEB handling: 20
[ 2.517099] UBI: background thread "ubi_bgt1d" started, PID 42
[ 2.523737] file system registered
[ 2.528918] using random self ethernet address
[ 2.533741] using random host ethernet address
[ 2.538850] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.546077] android_usb gadget: Number of LUNs=1
[ 2.550861] lun0: LUN: removable file: (no medium)
[ 2.556566] android_usb gadget: android_usb ready
[ 2.562437] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 2.570013] jz-rtc jz-rtc.0: setting system clock to 2014-08-22 03:03:31 UTC (1408676611)
[ 2.578572] ALSA device list:
[ 2.581651] #0: erosq
[ 2.587887] UBIFS: background thread "ubifs_bgt0_0" started, PID 45
[ 2.647408] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.653742] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.663175] UBIFS: FS size: 60567552 bytes (57 MiB, 477 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.673138] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.678351] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 5A955288-026B-4B97-9034-0D2EF4C249B3, small LPT model
[ 2.690181] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.698493] Freeing unused kernel memory: 236K (804e5000 - 80520000)
[ 2.751046] mmc0: new high speed SDHC card at address 0001
[ 2.758369] mmcblk0: mmc0:0001 EITSD 29.1 GiB
[ 2.768906] mmcblk0:
[ 3.334412] FAT-fs (mmcblk0): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 3.350307] FAT-fs (mmcblk0): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.540907] UBIFS: background thread "ubifs_bgt1_0" started, PID 76
[ 3.622440] UBIFS: mounted UBI device 1, volume 0, name "data_vol"
[ 3.628835] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 3.638462] UBIFS: FS size: 44441600 bytes (42 MiB, 350 LEBs), journal size 2285568 bytes (2 MiB, 18 LEBs)
[ 3.648602] UBIFS: reserved for root: 2099086 bytes (2049 KiB)
[ 3.654755] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E48E93B2-9430-4E52-9816-86A35E020AD4, small LPT model
[ 4.051373] gpio_request GPIO 58 , name rtc32k
[ 5.055135] clear SIGNATURE
[ 5.338499] graphics fb0: open count : 1
[ 5.373165] jz-fb jz-fb: the slcd slcd_cfg_new is 00000200
[ 6.750597] DWC USB connect
[ 6.760631] dwc2 dwc2: enter dwc2_gadget_plug_change:2690: plugin = 1 pullup_on = 0 suspend = 0
[ 6.801090] android_usb: already disabled
[ 6.806747] adb_bind_config
[ 6.971338] android_work: sent uevent USB_STATE=CONNECTED
[ 6.986108] android_usb gadget: high-speed config #1: android
[ 6.994502] android_work: sent uevent USB_STATE=CONFIGURED
[ 7.020865] adb_open
PS C:\Users\JD\Downloads\platform-tools-latest-windows\platform-tools> .\adb shell amixer contents
numid=3,iface=MIXER,name='ES9018_K2M Digital Filter'
; type=INTEGER,access=rw------,values=1,min=0,max=4,step=0
: values=0
numid=1,iface=MIXER,name='Left Playback Volume'
; type=INTEGER,access=rw------,values=1,min=0,max=255,step=0
: values=0
numid=4,iface=MIXER,name='Output Port Switch'
; type=INTEGER,access=rw------,values=1,min=0,max=5,step=0
: values=0
numid=2,iface=MIXER,name='Right Playback Volume'
; type=INTEGER,access=rw------,values=1,min=0,max=255,step=0
: values=0
numid=5,iface=MIXER,name='isDSD'
; type=BOOLEAN,access=rw------,values=1
: values=off