1
Audio Playback, Database and Playlists / Re: Database/tagnavi : Only show track title while ordering based on track number ?
« Last post by Bilgus on March 18, 2024, 10:22:19 PM »Likely there is a particular track hanging the player maybe try building the db with the plugin and see where it hangs
(assuming you are using a recent dev version)
(assuming you are using a recent dev version)
2
Rockbox Utility / Re: iPod Newbie - Install query
« Last post by Frankenpod on March 18, 2024, 09:46:47 PM »Be aware a 6g 80GB is limited to 128GB using the original firmware. And even if you install rockbox that could end up becoming a problem if you install any larger capacity storage.
Also, I thought the official installer gave you the option of picking the last "point release" or the latest dev version?
Also, I thought the official installer gave you the option of picking the last "point release" or the latest dev version?
3
Rockbox Utility / iPod Newbie - Install query
« Last post by Dark2024 on March 18, 2024, 08:47:19 PM »Hello Folks,
I hope this is the right formn to post this query
I used to use Rockbox on a Sanza Clip Disk many years ago, and having recently come into possesion of an old 6G iPod Classic (80g), thought I would give RB a spin again.
I am thinking of getting the iPod updated (i.e. SSD/card fitted, new battery etc.) and have read a few posts on the forum about installing RB on these updated iPods
Some posts suggest you need to manually install a dev build due to some SSD issues, other posts seem to suggest that the problems are solved.
So my question is, can the existing installer be used (i.e. to install 3.15) or do I follow the manual install process (to install a dev build), as decribed in the following links?
https://download.rockbox.org/daily/manual/rockbox-ipod6g/rockbox-buildch2.html#x4-110002.2.2 - 2.2.2 Manual Installation
https://forums.rockbox.org/index.php/topic,54105.msg249838.html#msg249838 - Ultimate iFlash guide for iPod Classic
Thanks in advance!
Dark
I hope this is the right formn to post this query
I used to use Rockbox on a Sanza Clip Disk many years ago, and having recently come into possesion of an old 6G iPod Classic (80g), thought I would give RB a spin again.
I am thinking of getting the iPod updated (i.e. SSD/card fitted, new battery etc.) and have read a few posts on the forum about installing RB on these updated iPods
Some posts suggest you need to manually install a dev build due to some SSD issues, other posts seem to suggest that the problems are solved.
So my question is, can the existing installer be used (i.e. to install 3.15) or do I follow the manual install process (to install a dev build), as decribed in the following links?
https://download.rockbox.org/daily/manual/rockbox-ipod6g/rockbox-buildch2.html#x4-110002.2.2 - 2.2.2 Manual Installation
https://forums.rockbox.org/index.php/topic,54105.msg249838.html#msg249838 - Ultimate iFlash guide for iPod Classic
Thanks in advance!
Dark
5
New Ports / Re: Pocket Go
« Last post by cleansugar on March 18, 2024, 12:20:36 PM »I am waiting this.
Thank you.
Thank you.
6
New Ports / Resources for Telechips TCC890x: TCC8900 & TCC8902
« Last post by cleansugar on March 18, 2024, 11:55:46 AM »https://www.cnx-software.com/2010/09/20/resources-for-telechips-tcc890x-tcc8900-tcc8902/
Although, Telechips claims to support WinCE, Embedded Linux and Android, they now fully focus on Android development giving other OSes a lower priority. However, the development board and BSP must be obtained from Telechips and BSP is not (legally) available for download on the internet, so you’ll need to contact Telechips at TCCSM@telechips.com.
However, as often, it seems a version of the Linux and WinCE BSP has been leaked on the internet:
See http://www.mp4nation.net/forum/viewtopic.php?f=20&t=16030
where they found a torrent with the following files:
Telechips TCC8900
LINUX_APP_v1.300_2009_11_04.tar 123.96 MB
LINUX_DOC_091104-R0150B2265.zip 5.54 MB
Linux89&92XX_openGLES1.1_2.0_openVG_Sample.zip 5.23 MB
Magellan v1.5 build 2266.zip 10.42 MB
TCC89_92xx_ALL_3D_0.50E – Linux.pdf 507.93 KB
TCC89_92xx_ALL_3D_0.50E – QnA.pdf 81.04 KB
TCC89_92xx_ALL_3D_0.50E – WinCE.pdf 620.62 KB
TCC89xx 91xx 92xx Linux BSP Documents v1.5.zip 5.89 MB
TWS89x_600.zip 21.91 MB
with source, schematics and documentation.
The guys at XDA forum have also started to hack Augen Gentouch 78 a tablet using TCC8902 platform. I’ve already blogged a video review for this Android tablet. The reviewer did not like the device, but this was not directly related to the performance of Telechips device.
Here’s also comparison between TCC8900 TCC8902 chips (and some other telechips series namely TCC91xx and tcc92xx)
---
Telechips 8900 spec sheet
https://d1.amobbs.com/bbs_upload782111/files_35/ourdev_601723E581YN.pdf
Koren electronic dictionary iriver dicple(아이리버 딕플) D150(D100,D180) PCB
https://m.blog.naver.com/ty382444/221998284955
Dicple D200 series(d200,d250,d290, d300) PCB
https://m.blog.naver.com/ty38244/221065843466
Iriver Electronic dictionaries
https://namu.wiki/w/%EB%93%9C%EB%A6%BC%EC%96%B4%EC%8A%A4%EC%BB%B4%ED%8D%BC%EB%8B%88/%EC%95%84%EC%9D%B4%EB%A6%AC%EB%B2%84%20%EC%A0%9C%ED%92%88%20%EB%AA%A9%EB%A1%9D#s-9
Although, Telechips claims to support WinCE, Embedded Linux and Android, they now fully focus on Android development giving other OSes a lower priority. However, the development board and BSP must be obtained from Telechips and BSP is not (legally) available for download on the internet, so you’ll need to contact Telechips at TCCSM@telechips.com.
However, as often, it seems a version of the Linux and WinCE BSP has been leaked on the internet:
See http://www.mp4nation.net/forum/viewtopic.php?f=20&t=16030
where they found a torrent with the following files:
Telechips TCC8900
LINUX_APP_v1.300_2009_11_04.tar 123.96 MB
LINUX_DOC_091104-R0150B2265.zip 5.54 MB
Linux89&92XX_openGLES1.1_2.0_openVG_Sample.zip 5.23 MB
Magellan v1.5 build 2266.zip 10.42 MB
TCC89_92xx_ALL_3D_0.50E – Linux.pdf 507.93 KB
TCC89_92xx_ALL_3D_0.50E – QnA.pdf 81.04 KB
TCC89_92xx_ALL_3D_0.50E – WinCE.pdf 620.62 KB
TCC89xx 91xx 92xx Linux BSP Documents v1.5.zip 5.89 MB
TWS89x_600.zip 21.91 MB
with source, schematics and documentation.
The guys at XDA forum have also started to hack Augen Gentouch 78 a tablet using TCC8902 platform. I’ve already blogged a video review for this Android tablet. The reviewer did not like the device, but this was not directly related to the performance of Telechips device.
Here’s also comparison between TCC8900 TCC8902 chips (and some other telechips series namely TCC91xx and tcc92xx)
---
Telechips 8900 spec sheet
https://d1.amobbs.com/bbs_upload782111/files_35/ourdev_601723E581YN.pdf
Koren electronic dictionary iriver dicple(아이리버 딕플) D150(D100,D180) PCB
https://m.blog.naver.com/ty382444/221998284955
Dicple D200 series(d200,d250,d290, d300) PCB
https://m.blog.naver.com/ty38244/221065843466
Iriver Electronic dictionaries
https://namu.wiki/w/%EB%93%9C%EB%A6%BC%EC%96%B4%EC%8A%A4%EC%BB%B4%ED%8D%BC%EB%8B%88/%EC%95%84%EC%9D%B4%EB%A6%AC%EB%B2%84%20%EC%A0%9C%ED%92%88%20%EB%AA%A9%EB%A1%9D#s-9
7
Apple - Installation/Removal / iPod (but not Rockbox) Newbie - Install query
« Last post by Dark2024 on March 18, 2024, 09:02:36 AM »Hello Folks,
I hope this is the right formn to post this query
I used to use Rockbox on a Sanza Clip Disk many years ago, and having recently come into possesion of an old 6G iPod Classic (80g), thought I would give RB a spin again.
I am thinking of getting the iPod updated (i.e. SSD/card fitted, new battery etc.) and have read a few posts on the forum about installing RB on these updated iPods
Some posts suggest you need to manually install a dev build due to some SSD issues, other posts seem to suggest that the problems are solved.
So my question is, can the existing installer be used (i.e. to install 3.15) or do I follow the manual install process (to install a dev build), as decribed in the following links?
https://download.rockbox.org/daily/manual/rockbox-ipod6g/rockbox-buildch2.html#x4-110002.2.2 - 2.2.2 Manual Installation
https://forums.rockbox.org/index.php/topic,54105.msg249838.html#msg249838 - Ultimate iFlash guide for iPod Classic
Thanks in advance!
Dark
I hope this is the right formn to post this query
I used to use Rockbox on a Sanza Clip Disk many years ago, and having recently come into possesion of an old 6G iPod Classic (80g), thought I would give RB a spin again.
I am thinking of getting the iPod updated (i.e. SSD/card fitted, new battery etc.) and have read a few posts on the forum about installing RB on these updated iPods
Some posts suggest you need to manually install a dev build due to some SSD issues, other posts seem to suggest that the problems are solved.
So my question is, can the existing installer be used (i.e. to install 3.15) or do I follow the manual install process (to install a dev build), as decribed in the following links?
https://download.rockbox.org/daily/manual/rockbox-ipod6g/rockbox-buildch2.html#x4-110002.2.2 - 2.2.2 Manual Installation
https://forums.rockbox.org/index.php/topic,54105.msg249838.html#msg249838 - Ultimate iFlash guide for iPod Classic
Thanks in advance!
Dark
8
Audio Playback, Database and Playlists / Re: Database/tagnavi : Only show track title while ordering based on track number ?
« Last post by eriolloan on March 18, 2024, 08:15:00 AM »I'm not there yet.
Using these formats for tracks it works perfectly for mp3 files, but when selecting a folder containig FLAC files, rockbox freezes completely....
edit: Should I open another thread for this problem ?
Using these formats for tracks it works perfectly for mp3 files, but when selecting a folder containig FLAC files, rockbox freezes completely....
Code: [Select]
%format "fmt_title" "%s (%s)" basename filename ? title == "<Untagged>"
%format "fmt_title" "%d%02d%s" discnum tracknum title ? discnum > "0" %strip = "3"
%format "fmt_title" "%02d%s" tracknum title ? tracknum > "0" %strip = "2"
%format "fmt_title" "%s" title
%format "fmt_alphanum_title" "%s" title
edit: Should I open another thread for this problem ?
9
New Ports / Re: AIGO EROS Q / AIGO EROS K / IRULU Surfans F20 / AGPTek H3 / HIFI WALKER H2
« Last post by smbgaiden on March 18, 2024, 12:59:35 AM »Getting the plugins to work and made decent progress with avoiding defining the scroll wheel as PLA_LEFT/RIGHT and some minor fixes on oversights in some of the plugins.
Hit some dead ends with the apps/plugins/puzzles series. Anyone understand the button firmware well and these puzzles button logic well?
In rockbox.c in apps/plugins/puzzles, first issue is the call to buttons_get_w_tmo returns decently with any button or scroll action. However the call to button_status shortly afterwards will not report on either scroll direction. Since the local variable button is reused on the button_status call then there is no longer any record of the scroll actions and the games like Black Box,etc, can't move right and left. I saw button_status is simple and just returns lastbtn. And lastbtn is set in the ticks function. Perhaps a race condition on button_get_w_timeout using 0xFFFFFFFF unblocks with the key before the message posts to button_queue? The only likeness i could find was brickmania which has a similar button_grt_w_tmo followed by button_status, except two differences, firstly is that it works for the button_status call and secondly the call to button_get_w_tmo has a much shorter timeout than the puzzle series. For puzzles, is it the button queue post vs the immediate return from button_get_w_timeout after a button is pressed that prevents the lastbtn to get set? The physical buttons like back, menu, prev, next, and etc don't suffer the issue hence thinking it is related to the queue.
i implemented a workaround to the button_status issue, but don't think this is something to propose as a commitable patch. The button_status workaround was: make a copy of the return of button_get_w_tmo, after button_status is called do ifdef for erosq_pad, inside this if the copy of the button had a scroll left or scroll right set then OR | them into the return of button_status
variable.
I noticed this has ADB and have used it successfully. However there's no logcat. a what's a good way to do printf style debugging to explore the button_queue vs ticks vs button_status vs button_get_w_tmo logic? Thank you
Hit some dead ends with the apps/plugins/puzzles series. Anyone understand the button firmware well and these puzzles button logic well?
In rockbox.c in apps/plugins/puzzles, first issue is the call to buttons_get_w_tmo returns decently with any button or scroll action. However the call to button_status shortly afterwards will not report on either scroll direction. Since the local variable button is reused on the button_status call then there is no longer any record of the scroll actions and the games like Black Box,etc, can't move right and left. I saw button_status is simple and just returns lastbtn. And lastbtn is set in the ticks function. Perhaps a race condition on button_get_w_timeout using 0xFFFFFFFF unblocks with the key before the message posts to button_queue? The only likeness i could find was brickmania which has a similar button_grt_w_tmo followed by button_status, except two differences, firstly is that it works for the button_status call and secondly the call to button_get_w_tmo has a much shorter timeout than the puzzle series. For puzzles, is it the button queue post vs the immediate return from button_get_w_timeout after a button is pressed that prevents the lastbtn to get set? The physical buttons like back, menu, prev, next, and etc don't suffer the issue hence thinking it is related to the queue.
i implemented a workaround to the button_status issue, but don't think this is something to propose as a commitable patch. The button_status workaround was: make a copy of the return of button_get_w_tmo, after button_status is called do ifdef for erosq_pad, inside this if the copy of the button had a scroll left or scroll right set then OR | them into the return of button_status
variable.
I noticed this has ADB and have used it successfully. However there's no logcat. a what's a good way to do printf style debugging to explore the button_queue vs ticks vs button_status vs button_get_w_tmo logic? Thank you
10
Audio Playback, Database and Playlists / Re: Database/tagnavi : Only show track title while ordering based on track number ?
« Last post by eriolloan on March 17, 2024, 09:00:59 PM »Sorry, I guess I was not reading the doc properly, I found out I can use %strip to do just that
%strip = "<n>" removes n characters from the beginning of the display string. This can be used to hide initial field(s) included only for sorting.
%strip = "<n>" removes n characters from the beginning of the display string. This can be used to hide initial field(s) included only for sorting.