Rockbox Technical Forums

Support and General Use => Hardware => Topic started by: studio910 on October 04, 2021, 01:43:11 PM

Title: IPOD Video 5.5 - accessory protocol questions
Post by: studio910 on October 04, 2021, 01:43:11 PM
Hi there.

I have a couple different memorex speaker docks i like to use. The thing is that at first each one had full response to the buttons on the little remote when in Rockbox. Then after a day or so, that response quit happening.  Now only the buttons that are from the dock hardware itself work (volume/power) work.  I am running a self compiled build from early september 2021 code. Is there any kind of reset/etc i can try to do to get this to work again?  I am really at a loss, and was really happy whith being able to do the remote things with Rockbox.
Title: Re: IPOD Video 5.5 - accessory protocol questions
Post by: philden on October 04, 2021, 04:01:59 PM
Have you changed the Rockbox USB HID setting? That changes whether Rockbox responds to one of my docks using a 7th Gen iPod.
Title: Re: IPOD Video 5.5 - accessory protocol questions
Post by: studio910 on October 04, 2021, 04:24:18 PM
Thanks for the suggestion!

What settings make it work with the dock ?

Title: Re: IPOD Video 5.5 - accessory protocol questions
Post by: philden on October 04, 2021, 05:23:51 PM
I think the setting is just yes/no, or on/off. Try changing to the other setting from the current one.
Title: Re: IPOD Video 5.5 - accessory protocol questions
Post by: studio910 on October 04, 2021, 05:33:52 PM
Rats…
No difference.
Oh well…
Thanks for the suggestion.
Title: Re: IPOD Video 5.5 - accessory protocol questions
Post by: philden on October 04, 2021, 06:03:22 PM
Do the remote functions still work if you boot into the original Apple firmware? That would rule out a hardware issue.
Title: Re: IPOD Video 5.5 - accessory protocol questions
Post by: studio910 on October 04, 2021, 06:11:30 PM
Yep. They work great in OFW.
I should have mentioned that.
My bad.