Support and General Use > Hardware
CompactFlash based iPod mini
SpaceFuzz:
OK. Here's the link to the "Unsupported Builds" forum for my successful and stable build (using 9/23/2007 source) for the iPod Mini 1st Gen using a Kingston Ultimate 133x 8GB (CF/8GB-U) compact flash card ($115 - $50 rebate = $65 through Adorama.com):
http://forums.rockbox.org/index.php?topic=12938.0
Should be listed as "iPod Mini 1G: Spacefuzz CompactFlash Build." This will be available for 30 days before being removed, unless I get motivated in that time and rebuild and repost. Don't expect it. ;)
@theli: I was wondering the same thing. It would be nice to query the device to get a hardware type and automatically set or disable the sleep function appropriately.
scharkalvin:
--- Quote ---Here's the link to the "Unsupported Builds" forum for my successful and stable build (using 9/23/2007 source) for the iPod Mini 1st Gen using a Kingston Ultimate 133x 8GB (CF/8GB-U) compact flash card ($115 - $50 rebate = $65 through Adorama.com):
--- End quote ---
could you also do a version for the 2g ipod mini?
thanks!
SpaceFuzz:
Here's the same build for the iPod Mini 2G. ATA sleep and Freq Scaling are disabled (causes hangs and crashes on mini--at least my 1G).
http://forums.rockbox.org/index.php?topic=12962.0
Note: I couldn't test this build (I have no 2nd Gen), so if you have problems, describe them, and I'll look into it.
bluebrother:
--- Quote from: SpaceFuzz on September 28, 2007, 05:49:33 AM ---ATA sleep and Freq Scaling are disabled (causes hangs and crashes on mini--at least my 1G).
--- End quote ---
the frequency scaling issues were resolved quite a while ago -- are you really sure you're still having those issues with the current builds?
heinimuecki:
--- Quote from: bluebrother on September 28, 2007, 06:28:54 AM ---the frequency scaling issues were resolved quite a while ago -- are you really sure you're still having those issues with the current builds?
--- End quote ---
that's right. i have a 2nd gen mini too with a 8gb cf card in
and it runs without errors (i use it in my car with an itrip transmitter).
so you don't have to turn that off for the 2nd gen.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version