Support and General Use > Hardware
Sansa E200 weird line on top of screen.
foolsh:
If you did get the front cover off, the version number is at the bottem of the board below the wheel on the front side.
In big white letters i.e. "VER: 1.1 OSP"
If you do not feel comfortable opening any electrical device I suggest you DO NOT attempt it, but I would have never learned somuch if I had never made magic smoke from perfectly working devices. ;)
Bagder:
--- Quote from: foolsh on March 26, 2007, 08:18:57 AM ---at least one of the e250s we own are 1.0
that means the other one is 99.99% a ver. 1.0 ,they were bought at the same time.
These don't have the problems the e260 has.
--- End quote ---
Don't confuse the hardware version 1.0 vs 1.1 with the model e260, as the e260 exist in both 1.0 and 1.1 versions.
I have an e260 1.0. Without line problem.
X86:
I have a ver 1.1 sansa E250 player and it has the same problem,it shows lines the first 2 row of pixels,but the second row is filled at the half,and when I boot up the original firmware it shows only less than half the first row,but the sansa still fine even it have rows of unused pixels,it just need more refinement,all are doing a great job,thanks for rockbox.
cax:
I have the same problem on my E260.
The only thing I can add is that when I play .mov in original firmware (after booting into it with rockbox bootloader) the screen "fixes" itself while the movie is playing. When the movie ends, the problem returns.
X86:
I thing that the video takes the whole screen and it unconsciously fixes that,and then it again shows the unused pixels,the thing is that is something unconscious,it might be the bootloader that takes that rows of pixels,so the problem as I think reside in the bootloader,the OF.bin file reamins intact,so is bootloader trouble.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version