Support and General Use > Hardware

Sansa E200 weird line on top of screen.

<< < (5/12) > >>

foolsh:
It turns out all three of the scanners I own are crap and produce blurry pictures.  :o
So I broke out my web cam and took some snap shots of the ICs in my e260

http://creativepc.gotdns.com/img/snapshot0.jpg
http://creativepc.gotdns.com/img/snapshot1.jpg
http://creativepc.gotdns.com/img/snapshot2.jpg
http://creativepc.gotdns.com/img/snapshot3.jpg
http://creativepc.gotdns.com/img/snapshot4.jpg
http://creativepc.gotdns.com/img/snapshot5.jpg
http://creativepc.gotdns.com/img/snapshot6.jpg
http://creativepc.gotdns.com/img/snapshot7.jpg

I haven't compared them to the other pictures yet.

merwin:
Looks like it's a version 1.1 as well... there's another person on page 1 who had the problem and has a ver 1.1 board as well.

Daniel's kit that he got shows it's a ver 1.0 board. I'll open mine up at some point and verify that it's a 1.1 as well.

I'd like to see pics of a couple people who don't have the problem and check if the board is ver 1.0

merwin:
I just opened mine up and it is a v1.1 as well.

foolsh:
at least one of the e250s we own are 1.0
that means the other one is 99.99% a ver. 1.0 ,they were bought at the same time.
These don't have the problems the e260 has.

Edil:
Guys I'm so mad to be so useless to you.

Well with much tremble and fear I removed the first 4 screws and the serial numbers of my cousin's unit are:

BH0611NGF
e200B0611341142

I then removed the other 4 tiny metallic screws but was unable to separate the cover and I didn't want to brake something (remember this DAP is not mine).

Sorry that's all what I can do, hope it helps somehow. I upgraded to the current build but the line still gets displayed at the top.

Navigation

[0] Message Index

[#] Next page

[*] Previous page