Rockbox Development > New Ports

Sandisk Sansa e200R

<< < (13/17) > >>

Bagder:
Thanks!

Just for the record, is that e200r.tgz anything I care about?

And BTW, since you seem to have enough clues: can you do a "fdisk -l" on the device your sansa appears as and show it to us here? We're interested in seeing exactly how big the "disk" is reported to be...

clutch:
I tried doing it in manufacturing mode and failled.  So I switched to the normal mode.  The .tgz file contains the three files that change every time I've updated the os.  I haven't done that for a while in case sansa / rhapsody is changing their drm along the way.  I seem to remember  a thread about that.

[root@localhost wess]# /sbin/fdisk -l /dev/sdb1

Disk /dev/sdb1: 1988 MB, 1988884992 bytes
62 heads, 62 sectors/track, 1010 cylinders
Units = cylinders of 3844 * 512 = 1968128 bytes

This doesn't look like a partition table
Probably you selected the wrong device.

     Device Boot      Start         End      Blocks   Id  System
/dev/sdb1p1   ?      202429      499388   570754815+  72  Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(357, 116, 40) logical=(202428, 43, 11)
Partition 1 has different physical/logical endings:
     phys=(357, 32, 45) logical=(499387, 30, 51)
Partition 1 does not end on cylinder boundary.
/dev/sdb1p2   ?       43884      547534   968014120   65  Novell Netware 386
Partition 2 has different physical/logical beginnings (non-Linux?):
     phys=(288, 115, 43) logical=(43883, 52, 47)
Partition 2 has different physical/logical endings:
     phys=(367, 114, 50) logical=(547533, 14, 42)
Partition 2 does not end on cylinder boundary.
/dev/sdb1p3   ?      486442      990091   968014096   79  Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
     phys=(366, 32, 33) logical=(486441, 36, 30)
Partition 3 has different physical/logical endings:
     phys=(357, 32, 43) logical=(990090, 59, 39)
Partition 3 does not end on cylinder boundary.
/dev/sdb1p4   ?      750698      750712       27749+   d  Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
     phys=(372, 97, 50) logical=(750697, 30, 25)
Partition 4 has different physical/logical endings:
     phys=(0, 10, 0) logical=(750711, 57, 33)
Partition 4 does not end on cylinder boundary.

Partition table entries are not in disk order
[root@localhost wess]#

I'm taking another nap.  Will check in later.

HTH,
Clutch

GodEater:
Try again, with fdisk -l /dev/sdb (not /dev/sdb1 as you did previously)  :)

clutch:
Sorry.  

[root@localhost wess]# /sbin/fdisk -l /dev/sdb

Disk /dev/sdb: 1989 MB, 1989148672 bytes
213 heads, 35 sectors/track, 521 cylinders
Units = cylinders of 7455 * 512 = 3816960 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         522     1942270+   6  FAT16
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(0, 8, 12) logical=(0, 14, 26)
Partition 1 has different physical/logical endings:
     phys=(241, 212, 35) logical=(521, 28, 21)
[root@localhost wess]#

Clutch

Bagder:
thanks!

Now, can anyone with a vanilla e250 player show us the exact same command line and its output?

Navigation

[0] Message Index

[#] Next page

[*] Previous page