Can't return to original Firmware on h10

[bahus]

I have no problem with running original firmware before. But when I install new version of Rockbox i try dualboot feature without decryption of original  h10.mi4 file and 10 hang on on Initialization screen. I reboot it by battery removing. When I put back original h10.mi4 file and load h10 - he hang on on first welcome screen( even initialization not started). After that I can't load original firmware at all, but Rockbox load fine. I try format disk, and restore firmware by using iriver plus - after restoration appear h10.mi4 file from Rockbox   Who can help me to load original firmware?

[barrywardell]

I'm a bit confused by what your exact problem is. Are you trying to go back to the original iriver firmware? If so, it should be just a matter of putting your original H10.mi4 file in the System directory (you did back it up, right?).

[bahus]

With original h10.mi4 file in System directory my Iriver hangs on while loading.  

[barrywardell]

And what does it show on the lcd when it hangs? Does it show a spinning clock?

[bahus]

>And what does it show on the lcd when it hangs? Does it show a spinning clock?
First blue screen with titles IRIVER and EU 1.10(at bottom right corner)

[007quick]

If you want to revert (get rid of rockbox) you need to rename the H10_original.mi4 file to either H10.mi4 (5GB)  H10_20GC.mi4 (20GB) If you are trying to acomplish dual boot then follow the link on my site labeled "guide"   http://007quick.googlepages.com/  

[bahus]

If you want to revert (get rid of rockbox) you need to rename the H10_original.mi4 file to either H10.mi4 (5GB)  H10_20GC.mi4 (20GB) If you are trying to acomplish dual boot then follow the link on my site labeled "guide"   http://007quick.googlepages.com/  

Nothing helps:
1) I put h10.mi4 from original firmware to System\ directory
2) I format disk on iriver and restore firmware by iRiverPlus.
3) I install H10_5G6G_UMSUpdate(EU)_v253.exe

Player freezes during boot:


But Rockbox  load well

[007quick]

K so you have a 5GB?  Are you doing dual boot? or revert to Iriver firmware?  If you are trying to do dual boot you will need a decrypted version of your original.mi4 file and then you will need the rockbox bootloader, all of which should be in your E:/system/ folder. It seems to me that you didn't look at the guide from my website very well, because there is a section labled dual boot.

[Llorean]

Please, do not make "guides" or "tutorials" for things like installation which are documented in the manual.

If you feel the existing documentation is lacking, please try to contribute to the whole community by helping us improve it, rather than creating a second set of directions that can potentially confuse users further (especially in the case of steps or processes changing in the future).

[bahus]

 > so you have a 5GB?
Yes

> Are you doing dual boot?
No. I try to load original firmvare by any way (see my previous post).
When I say Rockbox load well, I mean I install it on clear system.

If use decrypdetd version of  original.mi4 and try to doing dual boot - result the same( player hangs on).

[Konig Drache]

I think I have your solution.

It sounds as if you want Rockbox totally off it, but it won't work, right?

Well, this happened to me a few minutes ago, deleted the rockbox.h10 file, then put the backup file, whatever it's called.
Then it would still run rockbox on there, and it would say files missing or whatever then would turn off.

So, I got pretty mad, then I thought, every time you update firmware from iriverarmerica.com it deletes everything on there.
So I went there, downloaded the latest for my h10, wiped out everything(Thank God I had all my songs on my computer just incase before I ever downloaded Rockbox).

Then it loaded normally, as I'm typing, I'm downloading all my music back to my h10.
Hope that helped.

[bahus]

I'm sure that I install the original firmware in the right way. But it's still doesn't load. What can be the reason of this?

[bahus]

With new boot loader h10 hangs on after

Rockbox boot loader
Version: r12862:12866
iriver H10 5/6GB
ST650211FX
Partition 0: 0x0b 476
Loading original firm
Trying /System/OF.mi4
mi4 size: 3D0800
CRC32: 4B78A0BA
Model id:
Binary type:
Calculated CRC32: 4B7
Searching for key:
default...found
default key used

[007quick]

If you just downloaded a "current build" then that is were the problem lies. There was an error introduced that hopefully will get taken out today but until then download an archived build from "current build" at top left "archived build" at top "H10 old" under the correct heading. If the error still ocures then then report back.

[bahus]

Yes, error is still occuring. I suppose the problem is in the player. Who can explain me what could have happen to it? I repeat, the original firmware stopped loading after my experiments with one of the first dual booting supporting h10.mi4.