HELP!!!I Got Sansa E250

Rockbox General > Rockbox General Discussion

(1/1)

hennu50:
Can Anyone Help Me.

I Got A A Sansa

Im a idiot and i didn't know how to make ROCKbox work so i took the files n first i renamed rockbox.e200 into PP5022.mi4 and then put em both to my Sansa and it sayed

Load main image failed
Switch to Recovery mode

So i did the recovery and when i runed the Sansa Recovery Program It Sayed an error like this

ERROR !

Application failed to read the version details.

So Please HELP

Im So Sad :'( :'( :'( :( :(

dan_a:
First off, you are right - that does seem a really idiotic thing to do. If there were any instruction that suggested you needed to rename rockbox.e200 to PP5022.mi4, can you point them out to me, because they are very wrong.
Also, you haven't read the posting guidelines for this forum.

However, don't worry. I can help you get your Sansa back.

* Put it into recovery mode by switching it on with "hold" on while pressing the record button.
Plug it into the USB on your computer.
* Open "My Computer." There should be a 16MB drive. There won't be many files on there, but don't worry, all your files are still in the Sansa.
* Copy this file onto the 16MB drive. Do not copy anything else. Really. I mean it.
* Safely disconnect the Sansa from the USB.
* Send a PayPal donation to the Rockbox project.
After doing those things, your Sansa should be OK again (the last step might not be necessary.)

dunno:
I honestly think that the copy, this file, is far to subtle and could be missed or overlooked, make that bold, or use some other method to highlight , >this file< ,

my .0000002c worth

Febs:
I can't make any sense out of your post at all, Dunno.

fmaz:
Ok, I've just ran into the same problem an for over an hour, nobody was really happy to help me, so I'll try to be constructive for everyone who would be in the same problem as me.

My situation:
I've a Sansa e280 American player (with the radio), I've installed RockBox but I was unable to remove it.

I just did the dan_a procedure, but I've lost the RADIO as I installed an European firmware on an American player.

Note: It would NOT be a good idea to install an American firmware on an European player. Based on what I've read, the European player doesn't have the "radio chip"...

So, if you need the original American Firmware, use this one:
http://daniel.haxx.se/sansa/e200/1.02.15a.mi4
... and follow the dan_a procedure

Note #2: if you copy a bad file in the 16mb partition, you will broke the player. Only copy VALID .mi4 files.

Here is a recap of the dan_a procedure:
1) Put it into recovery mode by switching it on with "hold" on while pressing the record button.
Plug it into the USB on your computer.
2) Open "My Computer." There should be a 16MB drive. There won't be many files on there, but don't worry, all your files are still in the Sansa.
3) Copy ONLY original .mi4 file onto the 16MB drive. Do not copy anything else. Really. I mean it.
Original .mi4 files:
European: http://daniel.haxx.se/sansa/e200/SKU_E-PP5022.mi4
American: http://daniel.haxx.se/sansa/e200/1.02.15a.mi4
4) Safely disconnect the Sansa from the USB.
5) Send a PayPal donation to the Rockbox project.

Navigation

[0] Message Index

Go to full version