Third Party > Repairing and Upgrading Rockbox Capable Players

Sansa E200 Bricked by Recovery Mode

<< < (39/46) > >>

aleec:
Hi! Sorry for my English.
After i using e200tool it say

root@alex-desktop:/home/alex/e200tool# ./e200tool recover bl_sd_boardsupportsd.rom
e200tool v0.2.3-alpha (c) by MrH 2006, 2007
Searching for device 0781:0720 ... 9 8 7 6 5 4 3 2 1 0 not found!
Searching for device 0b70:0003 ... found!
Initializing USB stub (4780 bytes) ... done!
bl_sd_boardsupportsd.rom: No such file or directory

root@alex-desktop:/home/alex/e200tool# ./e200tool i2cprogram i2c.bin
e200tool v0.2.3-alpha (c) by MrH 2006, 2007
Programming i2c rom (address=87) range 0x0000-0x2000 from 'i2c.bin'
Searching for device 6666:e200 ... 9 8 7 6 5 4 3 2 1 0 not found!
root@alex-desktop:/home/alex/e200tool# lsusb
Bus 003 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 005 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 006: ID 0b70:0003 PortalPlayer, Inc.
Bus 001 Device 001: ID 0000:0000  
Who can help me?

scorche:
When you ran "./e200tool recover bl_sd_boardsupportsd.rom", were you in the same directory that you saved bl_sd_boardsupportsd.rom in?

aleec:
Yes because md5sum get me check sum. and i can see it in file browser.

ItzBACON:
Hate to keep dragging out this thread, but I'm still having some issues.

When I first plug my player in under manufacturing mode, lsusb shows it as

Bus 001 Device 021: ID 0b70:0003 PortalPlayer, Inc.

If I attempt to run ./e200tool recover BD_SD_BOARDSUPPORT.rom at this point then it says:

ubuntu@ubuntu:~/Desktop$ ./e200tool recover BL_SD_BOARDSUPPORTSD.ROM
e200tool v0.2.3-alpha (c) by MrH 2006, 2007
Searching for device 0781:0720 ... 9 8 7 6 5 4 3 2 1 0 not found!
Searching for device 0b70:0003 ... found!
Failed to claim the interface (-1, Operation not permitted)

If I try and run the i2cprogram from here, it shows me this:

ubuntu@ubuntu:~/Desktop$ ./e200tool i2cprogram i2c.bin
e200tool v0.2.3-alpha (c) by MrH 2006, 2007
Programming i2c rom (address=87) range 0x0000-0x2000 from 'i2c.bin'
Searching for device 6666:e200 ... 9 8 7 6 5 4 3 2 1 0 not found!
ubuntu@ubuntu:~/Desktop$


I've gotten it to tell me the whole "Failed to claim the interface (-1, Operation not permitted) using the i2cprogram command too, just can't remember how I did it at the moment. Been messing with this thing for a while now, and I'm getting tired.

So is there something I'm missing here? Am I not doing something right? I've read this thread and a few others about a hundred times and I still can't seem to get my player to respond the way it's supposed to. Any help would be greatly appreciated.

JdGordon:
run the command as sudo
$ sudo ./e200tool recover BL_SD_BOARDSUPPORTSD.ROM

Navigation

[0] Message Index

[#] Next page

[*] Previous page