Third Party > Repairing and Upgrading Rockbox Capable Players
Sansa E200 Bricked by Recovery Mode
danymag:
--- Quote from: DoZer on May 08, 2007, 01:18:34 PM ---When you see at this screen http://epaun.com/e200/2.jpg "Writing xxxxx" try to turn off lock button.
--- End quote ---
Thanks for the suggestion DoZer but I was already doing that. Without that, the player complains that it is locked and shuts down. It's the same message I got when the player was working and the key was locked. Note that I did not get this key locked messages during my first attempts to "fix" the player.
danymag:
--- Quote from: Lue on April 25, 2007, 06:07:18 AM ---after reading the thread again and again,
I recognized a member called "Illa" (page 2/3), having the same problem like me.
It seems that the previous owner formatted the 16mb recovery mode partition.
Is there any hope for my sansa or is it completely dead?
Thank you.
Lue
--- End quote ---
Lue, did you manage to fix your brick after all ? Is it something we are doing wrong ?
Lue:
--- Quote from: danymag on May 09, 2007, 06:51:20 AM ---
--- Quote from: Lue on April 25, 2007, 06:07:18 AM ---after reading the thread again and again,
I recognized a member called "Illa" (page 2/3), having the same problem like me.
It seems that the previous owner formatted the 16mb recovery mode partition.
Is there any hope for my sansa or is it completely dead?
Thank you.
Lue
--- End quote ---
Lue, did you manage to fix your brick after all ? Is it something we are doing wrong ?
--- End quote ---
Until now I didn't..
I hadn't time to try chrisjs169's trick....
Lue
afshin3k3:
Hi
First of all I have to thank Bagder, Brambo for their posts. I have fixed my device a month ago. If you have read Brambo's post on page 8 you will find how to make your broken player work again.
Also there is a point when I wanted to rebuild my sansa from manufacturing mode using e200 tool some errors happened like
Programming failed (-71, Protocol error)
*DANGER*, player might not be bootable now! Please retry!
but don't worry your sansa will be bricked when you finish the process.
afshin3k3:
The log of the console was like this:
INFERNO:~/Sansa 2/e200tool-src # sudo ./e200tool recover BL_SD_boardSupportSD.rom
e200tool v0.2.3-alpha (c) by MrH 2006, 2007
Searching for device 0781:0720 ... 9 8 7 6 5 4 3 2 1 0 not found!
Searching for device 0b70:0003 ... found!
Initializing USB stub (4780 bytes) ... done!
Writing 'BL_SD_boardSupportSD.rom' to address 0x10600000
Searching for device 6666:e200 ... 9 8 found!
Write at 0x106007e0
Control message (-71, Protocol error)
INFERNO:~/Sansa 2/e200tool-src # sudo ./e200tool i2cprogram i2c.bin
e200tool v0.2.3-alpha (c) by MrH 2006, 2007
Programming i2c rom (address=87) range 0x0000-0x2000 from 'i2c.bin'
Searching for device 6666:e200 ... found!
Uploading at 0x2000
Uploading done!
Programming, please wait...
Programming failed (-71, Protocol error)
*DANGER*, player might not be bootable now! Please retry!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version