arm-elf-gcc problem

[bro2baseball]

When I try to compile rockbox, everything works fine except that the "arm-elf-gcc" is not found.

I've followed the directions here http://www.rockbox.org/twiki/bin/view/Main/CygwinDevelopment exactly. I reinstalled everything twice.

I replaced a line in /etc/profile with

Code: [Select]

PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/opt/sh/bin:/opt/m68k/bin:/opt/arm/bin:$PATH

, as per the instructions in the link above, thinking that my problem was that the path wasn't correct. However, after doing that cygwin doesn't even let me do the

Code: [Select]

../tools/configure

command.

Any help?

bro2

[saratoga]

Type echo $PATH and see what you got on your path.

[bro2baseball]

OK when I open cygwin and I type

Code: [Select]

echo $PATH

I get

Code: [Select]

/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Python22:/cygdrive/c/Program Files/Quicktime/QT System/

Does it matter what directory I type it in?

bro2

[saratoga]

Doesn't matter where.  However, none of those look like a place where you'd put your arm gcc compiler.  Are you sure you typed the export path command correctly?  It looks like it didn't work.

[bro2baseball]

What export command do you speak of? Like I said, I just followed the directions on the wiki.
(If you're talking about the path I replaced, yeah, I'm sure it's right. I copy and pasted.)

bro2

[Sentertainment]

here;s how ya do it...I had the same prob at first....
do windows search for the exe file, then once u find the directory use the path relative to the cygwin folder as the path.
(may be confusing, but if you can make sense of what I said....it works)

[saratoga]

What export command do you speak of?

http://www.rockbox.org/twiki/bin/view/Main/CrossCompiler

Like I said, I just followed the directions on the wiki.
(If you're talking about the path I replaced, yeah, I'm sure it's right. I copy and pasted.)

Well your path is still wrong, so something is off.  Try again.  Either by editing the scrip as in the above quide, or by using the export command above.  

[bro2baseball]

This is what I get when I run the shell script detailed in the cross compiling wiki page

.

I can't figure this thing out! That's not what's supposed to happen is it? There's no arm-elf folder in /usr/local.

bro2

[saratoga]

Sorry I think I misread your what you wrote above.  It looks like the compiler was never installed.  I'm not sure why, but it sort of sounds like you don't have wget installed in your cygwin.  You can add it from the cygwin setup program.

[decayed.cell]

Try copying arm-elf-gcc.exe from cygwin\opt\arm\bin to cygwin\bin

[bro2baseball]

I feel dumb because my problem was so obvious. I was editing the ect/profile with Wordpad, and after saving it messed the file up. I used Notepad++ and now it works fine.

thanks for all your help!

bro2

[Sentertainment]

I feel dumb because my problem was so obvious. I was editing the ect/profile with Wordpad, and after saving it messed the file up. I used Notepad++ and now it works fine.

thanks for all your help!

bro2

that's pretty much what I tried to say...but it didnt exactly come out clear

[Job Van Dam]

here;s how ya do it...I had the same prob at first....
do windows search for the exe file, then once u find the directory use the path relative to the cygwin folder as the path.
(may be confusing, but if you can make sense of what I said....it works)

Try copying arm-elf-gcc.exe from cygwin\opt\arm\bin to cygwin\bin

Greatest... pieces... of... advice.... ever...

I've been ripping out my pubic hair trying to get this blasted thing to compile. Two sentences change everything. Thanks tenfold guys.
Now I just gotta figure out how to fix this now:

Code: [Select]

CC target/arm/gigabeat/meg-fx/pcm-meg-fx.c
CONVBDF
CC sysfont.c
Header parsed
AR+RANLIB librockbox.a
make[1]: *** [/cygdrive/d/cygwin/home/griz/rockbox-devel/build/librockbox.a] Error 127
make: *** [all] Error 2

If anyone can help I'd appreciate it.
Again thank you so much Sentertainment & decayed.cell. You two... top of your game.

[Bagder]

If anyone can help I'd appreciate it.

If all you did before was to copy that gcc binary to your bin folder, then the problem is exactly the same: you don't have the necessary tool(s) in your path.

This is why the instructions for building a cross-compiler says change your PATH and not "copy files".

Also, you can use 'make V=1' to get more details printed in the console when you build.

I thought there were prebuilt cygwin packages already for this...

[Sentertainment]

Job Van Dam:  lol, I still have alot to learn about rockbox, I had the same trouble as you...luckily I've messed w/  linux b4 and figured it out fast.   Anyways, the copying part was bad advice, that can make more problems...just keep in mind you don't want to move files, you want to change the configuration saying where they are.

Badger:  Yes, there are packages built on the server...just the PATH isn't set correctly by default it seems, I had the same problem myself.