Downloads
release
dev builds
extras
themes
Documentation
manual
wiki
device status
Support
forums
mailing lists
IRC
Development
bugs
patches
dev guide
Search
Donate
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Welcome to the Rockbox Technical Forums!
Rockbox Technical Forums
Installation / Removal
Manual Installation
Iriver - Installation/Removal/Flashing
iRiver H340 - ATA Error
« previous
next »
Print
Pages: [
1
]
Author
Topic: iRiver H340 - ATA Error (Read 4039 times)
me3619
Member
Posts: 4
iRiver H340 - ATA Error
«
on:
October 14, 2006, 10:27:35 AM »
Hey, Im new to Rockbox, and Im quote intrigued with the whole project, I attempted to install it myself and I get the follwing error on bootup
ATA Error: -32
Insert USB Cable and press a button
Now, I followed the instructions to the letter, and I am using 1.29Kr Firmware and apparently patched correctly, also I am using the latest daily build, but I also attempted older versions, with the same result.
I was told it could be a hardware issue, In which i scandisked the hdd, with no errors shown, I was told it could also be battery related, but someone will have to explain that to me.. the firmware states
Batt : 3.67
when booting up, but I have just noticed the last boot it said 3.70, So i dont know if it has any bearing on it, but could that be related to hte battery issue?
Anyway any information or advise would be appriciated
Thanks
Logged
AlexP
Member
Posts: 3688
ex-BigBambi
Re: iRiver H340 - ATA Error
«
Reply #1 on:
October 14, 2006, 10:32:08 AM »
The number after battery is the voltage, so it has gone down from 3.7 V to 3.67 V after some use! I don't know anything about your problem I'm afraid, but the voltage should be OK - however you could try charging it, full is around 4.13 V IIRC
Does it boot when the charger is plugged in?
Logged
H140, F60, S120, e260, c240, Clip, Fuze v2, Connect, MP170, Meizu M3, Nano 1G, Android
me3619
Member
Posts: 4
Re: iRiver H340 - ATA Error
«
Reply #2 on:
October 15, 2006, 05:17:58 AM »
I have tried a full charge of the unit, in which it states the voltage is 4.14 BUT, I stil lget the exact same error as before.
Can ANYONE help shed some light on this, what about the developers, what does the error imply?
Logged
me3619
Member
Posts: 4
Re: iRiver H340 - ATA Error
«
Reply #3 on:
October 19, 2006, 05:55:08 AM »
This is really sad, there not one person in the development community... who can or is willing to help
At the very least, as my last post, whats the error imply?
Logged
LinusN
Member
Posts: 1914
Re: iRiver H340 - ATA Error
«
Reply #4 on:
October 19, 2006, 07:32:29 AM »
Remember that very few developers read this forum.
The error implies that there is something wrong with the ATA bus connection. It often helps to open it up and reseat the hard drive, but it may very well be a bug in Rockbox or a battery problem.
Logged
Archos Jukebox 6000, Recorder, FM Recorder/iAudio X5/iriver H1x0, H3x0/Toshiba Gigabeat F20/iPod G5, G5.5
sjoep
Member
Posts: 1
Re: iRiver H340 - ATA Error
«
Reply #5 on:
October 22, 2006, 06:21:57 AM »
I got the same problem with my H140, i smashed the player a bit hard against a table while being in my jacket, it was not on at that moment. When i wanted to hook it up to a pc it didnt work.
When i started it readed ata-error -32 en when i booted in iriver software (by holding the rec button, i dont know if this is possible with the H340) i got the message: "Check HDD connection".
So the problem is probably a hardware error: a loose contact of the HD, anyway i firmly smashed my player against a book and after a while hooked it up and it worked and was playing Pearl Jam. 8-)
First think i did was removing the rockbox firmware so i can ship it for repair if needed. I was probably very lucky with is and the player is working fine now.
Logged
Print
Pages: [
1
]
« previous
next »
Rockbox Technical Forums
Installation / Removal
Manual Installation
Iriver - Installation/Removal/Flashing
iRiver H340 - ATA Error
SMF 2.0.19
|
SMF © 2021
,
Simple Machines
Rockbox Privacy Policy
XHTML
RSS
WAP2
Page created in 0.08 seconds with 18 queries.