Support and General Use > Hardware
iRiver H120 REPAIRS - Sockets + Battery
Techy_Bloke:
just a few questions... / problems i may have...
first of all,
Q1: why does my LINE OUT signal levels get controled by my volume selection??.... why isnt it @ Unity / 0db output...
- 40db on the player is comming into my computer at almost 0DB... - which i kno is because of mp3 compression n diffenernt levels n wat not but stil...
Q2: i think my jack sockets might be stuffed or / dodgy cables because when ever i plug into a big PA system the levels dont even come up to 0db.. on a mixer :S but works fine with headphones...
Q:3 - MAIN... i wanna get a higher current MAH battery and install it because i need longer record times up to 10hrs + wat options do i have ??
ALSO my USB charge isnt working how do i get it 2 work ?
EDIT - I THINK I JUST BLEW UP MY OUTPUTS... i had it on charge but cause my plug is american n im in aussie im usuing a dodgy adaptor which is loose n it goes on n off charge and get extremely hot
now i dont get any output of sound and i dont get any input either....
Cheers for the input...
Brent
Llorean:
Firstly, please try to use real words. "Wat" is spelled "What" and the word "to" is not spelled "2". There are several other similar errors in your post, and our forum posting guidelines explain that we require an attempt be made at proper English. At the very least we require that you use real words.
Q1: This is a hardware limitation of the H120, the line out volume is not controllable seperately. -40dB on the unit just means "40db below the recorded level" and can really be any level depending on the record level of the file, how much you've boosted with bass/treble, and equalizer, and replaygain. Are *all* of your settings reset or do you have any of those in use?
Q2: What exactly are you using to measure the levels?
Q3: Your battery options don't really have anything to do with Rockbox. Just research batteries that fir the 1st and 2nd generation iPods. You'll have to swap the leads because the positive and negative are swapped, but other than that they should work.
Febs:
--- Quote from: Techy_Bloke on October 18, 2006, 07:37:33 AM ---ALSO my USB charge isnt working how do i get it 2 work ?
--- End quote ---
The H120 does not support USB charging.
Techy_Bloke:
ohh ok i thought it did ???...
now im trying to figure out what i am going to do...
there is no output and no input signal...
when i plug headfones into the line in it makes a crackle....
do i need to pull it apart and resolder something ??
this all happend while on the charger sending signal out...
when ever i am plugged into the charger there is no earthing if i touch the end of the plug i get zapped if touch the end of a plugged in jack i get zapped also..
any ideas on how i am goin to fix this ?
Febs:
--- Quote from: Techy_Bloke on October 20, 2006, 07:25:44 PM ---when ever i am plugged into the charger there is no earthing if i touch the end of the plug i get zapped if touch the end of a plugged in jack i get zapped also..
--- End quote ---
This is a known issue with the H120. I think it may even be mentioned in the player's manual (the original iriver manual, that is).
Navigation
[0] Message Index
[#] Next page
Go to full version