Rockbox Development > New Ports

SAMSUNG YH-920

<< < (19/46) > >>

pyro_maniac:
The logf output into a file works fine now and i got my first results on my player. I attached the file. Now i try to test more debug for the hardware.

EDIT: I also ran disassembler on my binary files but i don't understand the output yet.

lowlight:
pyro_maniac:
Can you test this Rockbox bootloader?

Rename the original firmware file on the device to OF.mi4.
Rename the attached file to replace the original firmware.

Hopefully something shows up on the screen after it restarts. Let me know what happens.

pyro_maniac:
i am not sure how the bootloader should get into the flash!?  ??? But i will try it.

EDIT: i tested it but your file is not accepted and declared as corrupt.

EDIT2: Now i got it! Your file has to be named as PP5020.mi4!!

I got screen on the YH 920! \o/ "Rockbox boot loader"

Chronon:
You don't load it to flash.  Just put it on the internal storage with the current name of the firmware file.

lowlight:
pyro_maniac:
Attach the USB, the device should appear as a mass storage drive. In the System\ directory there should be an mi4 file, either PP5020.mi4 or FW_YH920.mi4 (let me know, I'm guessing). That's the original firmware. Rename it to OF.mi4. Then rename the file I posted to the name of the original firmware mi4 file (PP5020.mi4 or FW_YH920.mi4). Note, the file I posted is an mi4 file (not a bin file), but the forum rules don't allow me to upload mi4 files.

Navigation

[0] Message Index

[#] Next page

[*] Previous page