Support and General Use > Theming and Appearance Customization

WPS image.bmp and text issue.

<< < (2/4) > >>

Yotto:
I had a very similar problem with my Lights wps.  I had a bugger of a time getting the text for the dB level to show up, even when the volume bar (which it slides with.  Cool effect) wasn't covering it.

The worst part is, I don't know the fix.  I know it works now, because I use it, but I don't know /why/ it works or what fixed it.  It was too far back.  However, download my patch in the wiki and check it out.  The answer is in there somewhere.

And mine works with the base build and with senab's build.  I don't know if it'd work with the Julius build.

fatherfork:
Alright, I've gotten a official build of Rockbox running, and I've stripped my skin of all remnants of scrolling margins and album art. I've set the bmp to show when hold is switched on.

First, before I've engaged the hold switch the first time:


Second, while the hold switch is engaged:


Last, after hold switch is disengaged:



As you can see, it has nothing to do with the patches. Moving text blinks briefly over the bmp. So my question is either; is it possible to do what I'm wanting to do, have the bmp cleared when not called upon; or is what I'm trying to do just not possible with the current version of Rockbox?

Again, thanks for your help.

FF

Llorean:
Well, it's clearly not possible with the current version ;)

But it sounds like there's a bug here. You might want to file a bug report on this one.

fatherfork:
I actually feel honored. Thanks Llorean. I'll submit that report, and hopefully you guys will get to it. Take your time, I understand you're already spread thin on more important issues.

In the mean time I'll just go back to the last working version of Applebox.

Thanks,

FF

Massa:
I had a deeper look at your WPS (inside iRiver h340 simulator build)

I found two unclosed conditional tags and that the whole WPS
is much to complicate to search for such an error.

So I tested it and stripped it down to the following:

--- Code: ---%xl|b|underart.bmp|0|0|
%?ps
Here is some additional text
also here is text behind the bitmap
and here - you'll only see a part
%wd

--- End code ---
I used shuffle on/off to switch it on or off (this is also availble in the simulator ;)
With this you're still able to reproduce the bug.

Could you please strip down your whole ZIP file to the stripped down WPS version and only the one bitmap and add it to your bugreport?

Navigation

[0] Message Index

[#] Next page

[*] Previous page