Support and General Use > Recording

[feature request] LCD-Remote Reduce Ticking *DURING RECORDING* (was a quesiton)

<< < (5/6) > >>

robert_w:
Thanks Colleagues for your clarification!:)
I thougth ticking occurs always. I am convinced to Iriver now :)

Have a nice day!
Robert

Mmmm:
OK, I've had one for (llorean) and one against(davide) for the lcd off button on the remote.

Just to point out what this would mean:


* You will be able to set up the recording levels with the remote prior to the concert and then switch the remote lcd off for actual recording.
* You can switch it back on at any time
* While recording with the remote lcd off, all buttons on the remote still work (so pausing, track split etc are still usable from the remote) without any interference
* The cliplight will also work on the remote with the lcd off (but there will be a slight blip in the recording when it comes on and another when it goes off)
The alternative is remote on and low constant interference or no remote plugged in at all and no remote buttons or clip light or stealth setting up or anything else.

Hmm I think I just convinced myself on this one. You gain remote buttons with no interference with this feature and use of the remote before and after the recording but you lose nothing. So therefore it must be good right?

Anyone else got any opinions?

Davide-NYC:
You have just convinced me as well.

Point: If you're clipping anyways what a little blip in the audio? You're clipping!

Davide-NYC

Llorean:
That was my thought on the clipping issue as well.

I think the real key here is picking the right button / interface for this. Would be better as an option that has to be enabled first, like A-B repeat for playback, and only then does the button function, so new users don't accidentally lock the screen and confuse themselves?

Mmmm:
OK, It's in....download a bleeding edge and give it a go.... :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page