Thank You for your continued support and contributions!
On both the M3K and the Shanling Q1, the behavior is also very odd when 'USB Mode' is set to 'Ask'
You need to hold down the rewind / fast forward buttons in the WPS. There's no problem with it as far as I'm aware. You can use the touchpad debug menu in System > Debug > View HW Info > Touchpad to verify the touchpad is working properly. You should see button: 00000040 when holding rewind and button: 00000080 when holding fast forward.
Quote from: projeKct on October 04, 2021, 11:33:08 PMI followed all instructions, and I can boot in Rockbox by pressing Power, or I can boot in FiiO mode by pressing Play+Power.But when I press Play+VolUp+Power, I doesn't boot in FiiO recovery mode. I only see the button light but the LCD remains off.If for some reason some part of your flash got corrupted/wiped, I have a full flash dump you could recover with. Unfortunately I don't have anything rigged up to easily dump or restore bits & pieces of the flash. I can spin up something but it may take a couple of weeks.If you really need to use the Fiio recovery, and you took a bootloader backup (fiiom3k-boot.bin), then you can restore it using the RB bootloader. That will restore the Fiio bootloader and should let you access the recovery. But this will only work if the rest of the flash is intact, which you can't easily determine yet.
I followed all instructions, and I can boot in Rockbox by pressing Power, or I can boot in FiiO mode by pressing Play+Power.But when I press Play+VolUp+Power, I doesn't boot in FiiO recovery mode. I only see the button light but the LCD remains off.
I can't believe I forgot to mention this -- but there is a pristine backup on the wiki which I posted ages ago. https://www.rockbox.org/wiki/pub/Main/FiioM3K/nand.bin. Rename this file to fiiom3k-boot.bin, and use the bootloader restore option. This gets you back to the original firmware, so you will be able to use its updater if you want to upgrade/downgrade the OF, but if you reinstall Rockbox you'll run into the same issue again.
in CMD got these errors[error] cannot open file bootloader.m3k (tar error: -2)[error] Boot failed: -2The un zipped bootloader file I unzipped and transfered was named "bootloader]Should it be renamed?
I'm getting this error as well. I have the .rockbox folder extracted to the SD card, I have the m3k file on the root of my SD too
Quote from: Njones on June 08, 2021, 09:33:22 PMin CMD got these errors[error] cannot open file bootloader.m3k (tar error: -2)[error] Boot failed: -2The un zipped bootloader file I unzipped and transfered was named "bootloader]Should it be renamed?I'm getting this error as well. I have the .rockbox folder extracted to the SD card, I have the m3k file on the root of my SD too, the m3k file and the exe file on my C drive. Installed the driver with Zadig for boot mode.Edit: So I changed to libusbk driver, it now says "notice: rockbox bootloader version (version number)Doesn't do anything else from here, I just turn off the device, the rockbox menu doesn't show up.
Rockbox/ jztool.exe bootloader.m3k
jztool.exe -l debug load fiiom3k bootloader.m3k
sourex, are you using the old XVortex port - with the graphical boot menu to pick between rockbox and the fiio player?
Is there a way to use the volume buttons for skip tracks with long press when the screen is off (original FW do so)?
Page created in 0.067 seconds with 16 queries.