Thank You for your continued support and contributions!
amachronic: does it make sense to reinstall the bootloader after all recent nand/spl changes?
Thanks for reporting, it turned out that setting was totally broken in the quickscreen. Should be fixed now in the latest dev build.
Also there is many time mentioned "hold the Play button (while booting)", but there is no "play button" on the M3K. Do You mean the upper "Power/lock button", or is there any other button reffered as "play"?
Quote from: praashek on September 09, 2021, 11:15:46 AMAlso there is many time mentioned "hold the Play button (while booting)", but there is no "play button" on the M3K. Do You mean the upper "Power/lock button", or is there any other button reffered as "play"?Take a look at the attached picture
Play/Pause toggle symbol is right under button
You can access the FiiO recovery mode by holding Play and Vol+ while booting, in case you need to update the FiiO firmware. Be warned that updating with the FiiO recovery mode will erase the Rockbox bootloader and you will need to install it again using jztool.
I followed all instructions, and I can boot in Rockbox by pressing Power, or I can boot in FiiO mode by pressing Play+Power.But when I press Play+VolUp+Power, I doesn't boot in FiiO recovery mode. I only see the button light but the LCD remains off.Is my player bricked? Thanks for you help!
Is my player bricked?
Page created in 0.172 seconds with 21 queries.