Support and General Use > Hardware
Do the iRiver H300 JOYSTICK LCD remotes work w Rockbox on an H1xx?
Davide-NYC:
Tons and tons of pics HERE --> http://www.misticriver.net/photos/thumbnails.php?album=364
I just got the two I ordered in the mail! They are perfect and they sort of work with my H-140.
I know that these are meant for the H3xx series, but the socket is the same and both the remotes and the base units are so similar I'm sure it won't take that much to get it all working the way it should in Rockbox.
Mmmm, PM me if you want to work something out.
:-)
adam917:
--- Quote from: Mmmm on July 26, 2006, 04:10:06 PM ---
--- Quote from: adam917 on July 26, 2006, 03:59:29 PM ---On that H300 LCD joystick remote, there's three jog-levers and the joystick (as well as the hold switch). There's probably more controls on it than the H100-series remote, which has just four jog levers and a Stop & Play button.
--- End quote ---
Are you sure? I can only see 2 on the pic and there aren't enough buttons defined in the code for 3!
Both the H1xx remote and the H3xx remote have 11 buttons defined which would tally with 3 jogs and 2 buttons (H1xx) or 2 jogs and 5 buttons (H3xx) (as there are 3 buttons per jog - unless you can't push in the H3xx ones).
I really want to know how they are labelled...do you push the top jog in to play, or push the bottom jog left etc..
--- End quote ---
OOPS MY MISTAKE! I have an LCD joystick remote from the iMP-900 MP3/WMA CD player and it's identical except for the words below the screen. There's ONE lever on the top and ONE on the bottom. The 'Reduce Ticking' option would be handy with this remote, as I've noticed ticking on it before on my iMP-900 with my Boostaroo amp.
My iMP-550 MP3/WMA CD player works fine with both remotes, and the button mappings are identical (you wouldn't be able to tell which CD player you were using except for a few updated firmware features & the Snakebyte game on the iMP-550) on both units.
Mmmm:
--- Quote from: Davide-NYC on July 26, 2006, 05:39:56 PM ---Tons and tons of pics HERE --> http://www.misticriver.net/photos/thumbnails.php?album=364
I just got the two I ordered in the mail! They are perfect and they sort of work with my H-140.
I know that these are meant for the H3xx series, but the socket is the same and both the remotes and the base units are so similar I'm sure it won't take that much to get it all working the way it should in Rockbox.
Mmmm, PM me if you want to work something out.
:-)
--- End quote ---
Ta for the pics...hmmm interesting..the top jog is push for play, the bottom push for stop, that's ok...
But the top left is labelled -10 and right +10 ??? what is that supposed to mean? The bottom left is a/b right is mode, whereas these are usually the same button! confusing eh?
Davide-NYC, could you do me a favour? With this remote plugged in, go to mode->info->debug->view I/O ports
now on the remote press left/ right on the jogs and tell me what numbers come up for ADC_REMOTE. From this, I'll know what buttons they are.
Also, I may have a patch/build for you to try out soon, If it works I probably won't need a remote off you, if it doesn't I will! (although I quite fancy having one anyway!) :D
Mmmm:
Ok, here's a build for you to try out
H3remotemods.zip
All normal screens should work now with all 3 remotes..give them a go. It messes my H100 remote keys up nicely so that's good (when I enable it for the patch that is). Check for any weirdness (like the wrong lcd lighting up and other possible weirdnesses).
Also give me those ADC_REMOTE numbers I asked for in my previous post so I can tell you what the rocker switches are supposed to do.
Hope it works... plugins probably don't, I'm still looking at it ;)
Davide-NYC:
OK, one of my remotes is slightly "off" from the other. Is that normal? Should I return one?
Here are the number:
Remote 1 (the more stable one)
Top Jogwheel
-10 (left) = B8
+10 (right) = 9F
press = 80
Bottom Jogwheel
a-b (left) = 50
mode (right) = 68
press = 38
Joystick
Up = D1
Down = 01
Left = EA
Right = 18
Press = NO CHANGE
Remote 2 (the less stable one)
Top Jogwheel
-10 (left) = B8
+10 (right) = 9F
press = 80
Bottom Jogwheel
a-b (left) = 50
mode (right) = 66/67 (vaccilating between the two numbers)
press = 37
Joystick
Up = D1/D2 (vaccilating between the two numbers)
Down = 01
Left = EA/EB (vaccilating between the two numbers)
Right = 18
Press = NO CHANGE
Does this mean the one of my remotes is bunk? Please let me know these cost me quite a bit (for a DAP remote).
Davide-NYC
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version