Third Party > Repairing and Upgrading Rockbox Capable Players

Iriver iHP-120 ATA - 11 with SSD upgrade

<< < (2/2)

Rydeen:
I guess the Rockbox forums aren't as active as they once were. Anyway I think I got my full 256 GB working. I ended up reformatting my disk and starting over from scratch. Instead of replacing my original backed up Rockbox firmware/files, I used the Rockbox utility to do a fresh installation of Rockbox 3.14.  After that I checked to see if it would boot.  To my surprise it seems to have worked.  I've moved about 50 GB of music to it and no problems yet.   There must be some issue with using a backup of the original drive and then expanding the partition size.

Rydeen:
Sadly after thinking everything was working properly I'm having issues again. With this setup it worked for a few days though rockbox was a bit unstable and would freeze up randomly requiring a reset which resulted in the ata 11 error on reboot which would only clear by connecting to my PC by USB and starting in USB bootloader mode. Now it seems that the issue has become worse requiring this start up procedure on every boot.  Maybe things become corrupted on repeated crashes. Even after reformatting and reinstalling everything from scratch it no longer boots properly.  My SSD still works fine and can be seen normally when connected to a PC. The original hdd also works perfectly fine and boots into rockbox without issue. I'm just lost and ready to give up on this mod. Maybe I'll try to get my hands on a known compatible CF card and go that route instead.

Navigation

[0] Message Index

[*] Previous page