Rockbox General > Rockbox General Discussion
Data abort at 30801294 . . . Sandisk Sansa e260v2
CurlySue:
Hi all,
Well - I thought the problem took care of itself and I asked the moderator(s) to remove my prior posting - I spoke too soon because the problem remains.
Prior to installing RB, I verified that I had the latest firmware version from Sandisk installed on my Sansa e260v2, version 03.01.16A Then I downloaded the firmware file and updated again, just to be sure.
My brother has a Sansa e260v1 running RB and it works PERFECTLY.
I have a Sansa e260v2 and today, using the RB UTILITY, I installed version 3.14 without any error messages.
After installing 3.14, I modified all of my settings to the same settings in my brother's e260v1 player.
RB boots super fast and I can scroll and select all options I wish. However, once I select a song to play - it plays - but as soon as I attempt to change the volume (using the thumb-wheel control as always) the song stops and RB gives me the following error code:
Data abort at 30801294
FSR 0x8
(domain 0, fault 8)
address 0x691789F4
pc:30901294 sp:300A9CF0
bt end
To ensure this is a RB problem, instead of booting to RB, I booted to Sandisk and the songs play fine and volume control via the thumb-wheel works perfectly throughout its' full range.
Thinking it may be a problem with the 3.14 version, I downloaded and installed the current DEV BUILD c6d5cd74a.
Unfortunately, the problem remains unchanged.
Thank you in advance for your support and suggestions.
CurlySue
Bilgus:
Couple of things to try, (in order preferably)
1. does it still happen if you are at the main menu and change volume
2. does it happen in radio mode and or recording mode
3. if you change themes?
4. bring your cursor to main menu>files on the player long press select choose Show Files>All
hit back to Main Menu go to files and short press select navigate to the .rockbox folder and IMPORTANT rename config.cfg to config.old and restart the player Rename NOT Delete it just in case it is a configuration issue that way we can track it down
Unfortunately I don't have access to the build server so I can't look at the memory map for your build maybe someone else will chime in otherwise I can build you a custom build and we can go from there to track it down...
CurlySue:
--- Quote from: Bilgus on September 09, 2017, 12:00:20 AM ---Couple of things to try, (in order preferably)
1. does it still happen if you are at the main menu and change volume
2. does it happen in radio mode and or recording mode
3. if you change themes?
4. bring your cursor to main menu>files on the player long press select choose Show Files>All
hit back to Main Menu go to files and short press select navigate to the .rockbox folder and IMPORTANT rename config.cfg to config.old and restart the player Rename NOT Delete it just in case it is a configuration issue that way we can track it down
Unfortunately I don't have access to the build server so I can't look at the memory map for your build maybe someone else will chime in otherwise I can build you a custom build and we can go from there to track it down...
--- End quote ---
Thanks for your reply and suggestions, Bilgus. ;D
1. in the main menu, thumb-wheel does not control volume - it controls screen scrolling ;)
2. don't listen to radio mode - and do not use as a recording device . . . only use is as a player ::)
3. still happens :(
4. still happens :(
It took a couple of days for my reply because, in addition to performing tests regarding your suggestions, I also completely removed RB and then reloaded SD software, then exectued a MANUAL INSTALL of RB 3.14 as detailed on Pages 16 and 17 of the Rockbox Manual for Sansa e200v2 Series . . . problem remains. >:(
Does anyone know where I can obtain RB 3.13 (one of the last dev builds) for the Sansa e200v2 Series player? I'd like to see if this PROBLEM is solely an RB 3.14 problem. :D
Thanks,
CurlySue
CurlySue:
Regarding # 2 . . .
After BOOTING to the MAIN MENU, when I select RESUME PLAYBACK and turn the thumb-wheel to adjust volume RB 3.14 immediately displays . . .
Data abort at 30801294
FSR 0x8
(domain 0, fault 8)
address 0x691789F4
pc:30901294 sp:300A9CF0
bt end
I could go ON and ON and ON regarding whatever it BOOTS to, once I turn the thumb-wheel to adjust volume RB 3.14 immediately displays . . .
Data abort at 30801294
FSR 0x8
(domain 0, fault 8)
address 0x691789F4
pc:30901294 sp:300A9CF0
bt end
Is there anyone that creates RB 3.14 code whom can READ and EVALUATE the above ERROR MESSAGE???
Thank you for the link to RB 3.13 . . . it will take some time to COMPLETELY REMOVE RB 3.14, reinstall a clean copy of SD, and then perform a clean MANUAL install of RB 3.13 . . . and then report my findings. It will either be late this evening or on Monday.
Thank you for your support.
CS
Bilgus:
yeah Sorry I grabbed the wrong link http://download.rockbox.org/release/3.13/rockbox-sansae200v2-3.13.zip
or http://download.rockbox.org/release/ to look through all the old releases
regarding a dev build from prior to 3.14 there is no reason to bother I will make you a build to test with, although it will take a few times
Navigation
[0] Message Index
[#] Next page
Go to full version