Support and General Use > Hardware

Sansa CLIP + install of Rockbox and drive not recognised but unable switch back

(1/1)

smithie:
Hi All,

Made a bit of a pig after install of Rockbox, I realised I didn't switch the clip+ from USB to MSC. 

Rockbox works fine but is not recognised on my pc when I plug it in via USB to add more music.  I can't go back to the Sandisk software as I get the dreaded "NOT ENOUGH SPACE FOR MUSIC DB, PLEASE FREE 90MB"

SO... I've got a working clip+ but unable to move music on or off!?

Can anyone suggest a reset or way around this...?

Thanks Smithie

johnb:
Turn it off, hold the center button and plug it into USB.

smithie:
THANKS JOHNB!

All up and running now.
If anyone is stuck, it found the drive after pressing the middle button, I removed rockbox off the sansa clip, updated the firmware - bin file and then changed USB setting to MSC.

Installed Rockbox via the installer and all good now..

rgds
Smithie

saratoga:

--- Quote from: smithie on March 18, 2017, 03:41:50 PM ---If anyone is stuck, it found the drive after pressing the middle button, I removed rockbox off the sansa clip, updated the firmware - bin file and then changed USB setting to MSC.

Installed Rockbox via the installer and all good now..

--- End quote ---

FWIW, this does nothing at all since the MSC setting will be reset back to MTP when you install rockbox. 

Navigation

[0] Message Index