Support and General Use > Hardware
[Clip+, Clip Zip, ClipV2, FuzeV2] Improve battery life, part 2
Mihail Zenkov:
--- Quote from: asymsucon on January 29, 2017, 02:44:05 AM ---Upon restart (and reset to 90), internal flash reinit on 6. May need more than 90 for stable operation.
--- End quote ---
Can you check what we should set (91-95) for this player?
--- Quote from: asymsucon on January 29, 2017, 02:44:05 AM ---Should I test more Clips?
--- End quote ---
We should find worst case for each player (name+variant). So first check player that need more than 90 and than check others with this value.
If you have clip+ variant 0 - try 76.
Mihail Zenkov:
--- Quote from: johnb on January 29, 2017, 04:16:46 AM ---Reporting back on the clip+ variant 0:
It has run now for more than 12h @ 76, stats still at 0,0,0,0!
--- End quote ---
Good!
--- Quote from: johnb on January 29, 2017, 04:16:46 AM ---I then switched to 75. The display starts to flicker slightly (too low refresh rate?), but it is running now for 80min stats still @ 0,0,0,0.
--- End quote ---
With very low voltages we can have problem not only with internal flash but also with RAM (panics, freezes, screen corruption time to time).
Can you check other your players?
johnb:
Mihail, I will test others (started clip+ var1), but I am visiting relatives and only have a few with me ;-)
I will stop trying with the var0 for now.
asymsucon
the files play fine with clip+ var0 @ 76. Stats @ 0.
asymsucon:
--- Quote from: Mihail Zenkov on January 29, 2017, 04:45:03 AM ---Can you check what we should set (91-95) for this player?
--- End quote ---
Unfortunately, it won't be that easy. Now I can't access its internal flash at all.
All attempts on connecting it to PC end with this:
regardless on CVDD2 setting (tried 100 and 105)
Any idea what to do?
Mihail Zenkov:
asymsucon
Is usb from bootloader (when player off - try hold select (middle button) and connect it to usb) works?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version