Support and General Use > Hardware
256GB SDXC in various Sansas - fails on Clip+
Mihail Zenkov:
Which exactly version of Clip+ and Fuze v2 you have? You can check it in system > debug > view hw info.
Did you try insert card when rockbox already booted?
Doghouse Riley:
Mihail, thanks for getting back to me, here's what I've got.
Sansa e260
Hardware ID PP5022C
256gb card works when inserted while powered down
256gb card works when inserted while powered up
Sansa Fuze v2
Hardware ID AMSv2Variant0
256gb card works when inserted while powered down
256gb card not recognized when inserted while powered up, Sansa does not lock up but can navigate only to its native storage
Sansa Clip+
Hardware ID AMSv2Variant1
256gb card crashes device with ATA error: -4 if inserted while powered down
256gb card works when inserted while powered up, however this is not ideal since I may turn the player on and off ten times a day, and I don't like removing and reinserting this fragile and expensive card every time.
All three devices are using the last official 3.13 release.
Hope you can help me to get the Clip+ to recognize the card if inserted before power up. Thank you!
saratoga:
Could you try the latest build and confirm its not fixed by the recent voltage changes?
Doghouse Riley:
Build 108a0f3-160823 from the dev builds page.
Intermittent success, crashed with the ata -4 (or -3 or -2) error about 85% of the time, occasionally booted up okay.
Also sometimes locked the player when the card was inserted after powerup.
FYI here is the card in question:
https://www.amazon.com/Samsung-Select-Micro-Memory-256GB/dp/B01G7L03OS
Mihail Zenkov:
Try this build: http://knk.square7.ch/rockbox-clipplus_sd256_0.zip
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version