Support and General Use > Hardware
New Development Builds Will Not Allow USB Connection Clip Zip
Mihail Zenkov:
You have this problem in all case ?
1. Plug USB when player on.
2. Plug USB when player off.
3. When player off, press "select" (middle button) and connect USB.
bbildman:
--- Quote from: Mihail Zenkov on October 10, 2014, 06:39:14 AM ---You have this problem in all case ?
1. Plug USB when player on.
2. Plug USB when player off.
3. When player off, press "select" (middle button) and connect USB.
--- End quote ---
Yes to 1 and 2, I will install the new build and try #3 and let you know, thanks
bbildman:
--- Quote from: Mihail Zenkov on October 10, 2014, 06:39:14 AM ---You have this problem in all case ?
1. Plug USB when player on.
2. Plug USB when player off.
3. When player off, press "select" (middle button) and connect USB.
--- End quote ---
Ok, here's the results::
If I press the Select button (player off) while I connect, the Rockbox boot screen flashes for a second, then goes black, the laptop shows the Sansa Clip connected (Sansa ClipZ drive) and I can read the Internal memory of the clip, but the microdisk I have inserted is not available at all. When I connect the Clip Zip normally either on or off, the laptop reports a 6 USb device, Dirve I and J, but the device never boots into those drives even though it shows the "Connected" screen. And the usual little device icon (Safely remove Hardware) is not there
If I hold the left button, it of course boots into Original Firmware and I see both drives, but when disconnected, it stays in Original firmware mode, and takes forever to refresh.
Only the 3.13 Rockbox boots normally into my 2 drives (1 is the Sansa, the other is the microchip drive)
All I want is to be able to use a build that has the Improved battery life described in the recent additions.
Mihail Zenkov:
What OS you use? Can you do test on another OS (if you can do test on linux, attach dmesg output) or on another computer?
bbildman:
--- Quote from: Mihail Zenkov on October 10, 2014, 08:39:59 AM ---What OS you use? Can you do test on another OS (if you can do test on linux, attach dmesg output) or on another computer?
--- End quote ---
Windows 7 64 bit, my other laptop (same OS) does exactly the same thing.
Reverted back to 3.13, unless you all can come up with something that explains and fixes this.
Thanks
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version