Sansa fuze+ Clock stops

[SYNERGiST]

Hi have been using rockbox for a while now. But now i have a problem with the clock, if i set the clock to something like... 12.30 and shut down and i start it some time later it haven't changed it is still at 12.30 or what the clock was when i shutdown.

Is this a bug in latest build it worked some builds back...
or is this something that i have done with some setting or what is it?

[metaphys]

Some people have reported problem with the clock. It wasn't really clear if this was a hardware problem or something related to rockbox. I experienced one time something close to it: booting in OF mode and setting the time there solved the issue for me...

[SYNERGiST]

Ok... didn't have this issue before...
What is OF mode and how do i boot into it?

[AlexP]

http://download.rockbox.org/daily/manual/rockbox-sansafuzeplus/rockbox-buildch3.html#x5-280003.1.3

[metaphys]

booting into OF (original firmware) is documented here :

http://www.rockbox.org/wiki/SansaFuzePlusPort

edit:
ach... to late

[SYNERGiST]

Thx.

That did fix my problem.

[Brush]

Thx.

That did fix my problem.

You're Lucky
My clock doesn't stop, but it does lose time when powered Off. Loses hours overnight. No Sansa f/w update has fixed it, and no RB f/w has fixed it. So I would assume a problem with the h/w itself, not a f/w issue.
Possibly related to the fact that it loses battery when powered Off! If it has a reasonable charge, I power off, and leave for 2 or 3 days, It is drained. Won't power up even briefly, without recharge.
It has been this way from Day-1, so maybe it is an original bad battery causing both issues?