Thank You for your continued support and contributions!
Okidoki, update:Tried with the remote, booted just fine... began to play an mp3 (somewhat odd keymappings on the remote...) and my x5 shut down. Huh?Did the same thing, different mp3 and my x5 froze, huh again?Ok... booted, started playing an mp3... browsed for another mp3 - x5 shut down.Something is fishy with the x5's remote...version cvs; 060825-1636
Edit: attachment was not working, hopefully OK now.Alpha testers required!(no compilation needed for Windows users)Prerequisites:X5/X5L main unitX5 remoteintrepidity Your mission, Jim, should you decide to accept it, is to install and test this new version of the dual bootloader.To install, use mkboot to combine the bootloader binary with any OF version and proceed like any firmware upgrade.The attached file contains x5-dual-bootloader.testing.bin (bootloader binary), mkboot.c (source) and mkboot.exe (precompiled to Windows).Boot sequences to verify:a short main-unit POWER press - RBa long main-unit POWER press - OFa short remote-unit POWER press - RBa long remote POWER press - OFa remote POWER press while remote HOLD is on - OF(actually you won't see it since the OF shuts down quickly)Important:If anything goes wrong (doesn't boot, stuck, etc.), reset the unit with a reset pin, connect USB cable and reflash a stable firmware. It is advised to do so even if all seems OK until I collect reports from more people.Disclaimer:I have not tested this code on my X5 since it's dead, but I believe it works. Even if it doesn't, you can restore a stable firmware via USB mode.
PLEASE HELP!!!Could you tell me how the dualboot is working on x5v?Is there a chance of getting all that stuff you need for dualboot in one file?If not tell a newbie from austria step by step how it works!Please help me anyone?Greetz Pazn
Unofficial versions are *not* supported here.
Very strange, I cannot boot Rockbox by using the dual bootloader. I am only able to load it while power cable is connected and hold the on button for ~0.5 seconds. Without power cable the device will not power on when I am pushing the power button for a short while, when doing it only a little longer it will boot the official firmware I have also tried the precompiled dualbootloader with the 2.10-k firmware, results are exactly the same.I am using a one of the latest precompiled RockBox versions (incl. patches) via iaudiophile.net. ( http://iaudiophile.net/forums/showthread.php?t=10349&page=19 )
Page created in 0.077 seconds with 21 queries.