Installation / Removal > Rockbox Utility

Problems Installing Bootloader on Sansaclip Zip

<< < (3/5) > >>

saratoga:

--- Quote from: zolo1 on August 09, 2012, 08:08:29 PM ---I cannot find this file anywhere on my PC , no where in my Sandisk folder as well. How do I get past this problem, to install Rock Box??  Even tried moving all three files in rbinstall folder, to no avail. Please advise on this issue and Thanks for the help!!!

--- End quote ---

You download it from Sandisk's website.  The popup message you get asking for it contains a link to the file. 

zolo1:
Thanks Saratoga, I had no idea you had responded until today, even though I selected the option, I was not sent a reply notification email for some reason.

Anyway, I was able to finally retrieve and download that Bin file. In RB Utility , I was shown that Bootloader and Rockbox install was a  success while my sansa zip clip was attached to PC, but after ejecting it, still did not show any sign of Rockbox in Sansa player.
So I then went to RB manual and found the below info, which is very confusing to me. Do not know what "OF" is or means??
 I put the bootloader (icon shows as unrecognized windows file), mkamsboot file and 01.01.20 firmware file (online many users show problems with Rockbox and new 01.01.20 firmware, is this new firmware ok to use??) all in the rbinstall folder on my desktop, but not too sure how to do the next command line etc steps below?
Sorry for the lengthy reply, but I have installed and use many programs, but Rockbox is one of the most difficult to install for me, the only feature I need really is the Hot Crossfade feature, so I guess this all the only to get it for now, please advise. Thanks for the help!!!

2.2.3. Bootloader installation from Windows
1. Create a folder called “rbinstall” on your desktop, and then extract the OF, the
bootloader and mkamsboot into it.
2. Open a new command prompt, and navigate to the “rbinstall” folder.
3. Run mkamsboot.exe, passing the name of the OF and bootloader files that you
downloaded, in addition to a name for the output file.
Code
mkamsboot.exe clpza.bin bootloader-clipzip.sansa patched.bin
If mkamsboot.exe does not report success, then retry or abort.
4. Copy the output file (“patched.bin” in the example given above) to the root of
the device and rename it to the same name as the OF file you downloaded earlier
(“clpza.bin” above).

bluebrother:

--- Quote from: zolo1 on August 09, 2012, 08:08:29 PM ---Even tried moving all three files in rbinstall folder, to no avail.

--- End quote ---

What three files? If you install Rockbox you have one file: Rockbox Utility. And then you need to download the Sandisk firmware file. That makes two in my book, not three.


--- Quote from: zolo1 on August 14, 2012, 12:08:46 AM ---Anyway, I was able to finally retrieve and download that Bin file. In RB Utility , I was shown that Bootloader and Rockbox install was a  success while my sansa zip clip was attached to PC, but after ejecting it, still did not show any sign of Rockbox in Sansa player.
--- End quote ---

Have you actually selected the correct mountpoint in the configuration dialog Rockbox Utility? Using manual installation is not recommended, and if you have problems like this without understanding whats happening you're likely to have problems with manual installation as well.


--- Quote ---So I then went to RB manual and found the below info, which is very confusing to me. Do not know what "OF" is or means??
--- End quote ---

Original Firmware. It's a common abbreviation here, you should see it a lot when searching the forums. It shouldn't be used in the manual though. Still, manual installation is not intended for unexperienced users.


--- Quote ---Sorry for the lengthy reply, but I have installed and use many programs, but Rockbox is one of the most difficult to install for me,
--- End quote ---

Rockbox is not a "normal program" you install but a replacement firmware. That means you're replacing the firmware on your device, which is a non-trivial process.

And please stop using advanced instructions without understanding why the simple ones didn't work. You can also post the system log of Rockbox Utility after you tried installing to allow easier troubleshooting (there is a menu entry Help / Troubleshooting, it's called Troubleshooting for a reason :) )

zolo1:
Hello Bluebrother, the 3 files I was merely referring to are the 3 files Manual says is required must download first: the OF, Bootloader, and mkamboot files. and then placed in rbinstall folder.  I tried attaching RB Utility trace Log file, as .log and .txt, but I kept getting error in forum reply, says it cannot accept format, so I just copied pasted log below.

Also Bluebrother, just not sure where all your somewhat snide remarks in reply are coming from, I am just merely asking for a little help to install Rockbox, but if you are irritated for some reason by my newbie questions, please do not feel obligated, I am sure can get some addtl help options or figure it out eventually.Tks

-I  have also selected correct mount point for my Sansa player manually which as log shows is on my F-drive , the Rockbox autoscan just will not work for me.

-Believe me , tried the  Auto install a few times, just will not work for me, so that's why was attempting a manual install, just thought being somewhat a longtime PC user, but not advanced, thought I could get it to install.

- As mentioned, I have attached the RB Utility log with this reply, and I must mention that Rockbox appears to be installed on Sansa Clip Zip after plugging into to computer, when I go into Sansa player on F drive, I show the RockBox Utility folder there, but each time I eject Sansa player from PC, and give it time to update etc, then unplug it, but Rockbox does not transfer or show up in player etc at all. So not sure why. Thanks all!!!!
======================================
[System] Rockbox Utility 1.2.14
[System] Qt version: 4.8.1
======================================
[Settings] configuration: system
[Settings] GET U: "proxytype" "none"
    (Last message repeated 2 times.)
"" "" "" -1
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "sansaclipzip/bootloadermethod" "ams"
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "sansaclipzip/bootloadermethod" "ams"
[Settings] GET U: "platform" "sansaclipzip"
[Settings] GET U: "mountpoint" "F:/"
    (Last message repeated 3 times.)
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "sansaclipzip/brand" "Sandisk"
[Settings] GET U: "platform" "sansaclipzip"
[ServerInfo] GET: "sansaclipzip/status" "Unknown"
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "sansaclipzip/name" "Sansa Clip Zip"
[Utils] Volume name of "F:/" is "SANSA CLIPZ"
[Settings] GET U: "platform" "sansaclipzip"
[ServerInfo] GET: "sansaclipzip/releaseversion" ""
[Settings] GET U: "offline" "false"
[RbUtil] downloading build info
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "build_info_url" "http://download.rockbox.org/build-info"
[HTTP] GET URI "http://download.rockbox.org/build-info"
[HTTP] cache DISABLED
[HTTP] downloading to file: C:/DOCUME~1/zolo/LOCALS~1/Temp/qt_temp.Hp3728
[HTTP] GET scheduled:    2
QLayout: Attempting to add QLayout "" to RbUtilQt "RbUtilQtFrm", which already has a layout
    (Last message repeated 2 times.)
[Utils] Found listed processes running: ()
[HTTP] Request started:  1 Header req: -1 Get req: 2
[HTTP] Request finished: 1 Error: false pending requests: true
[HTTP] Request started:  2 Header req: -1 Get req: 2
[HTTP] Request finished: 2 Error: false pending requests: false
[RbUtil] network status: 0
[ServerInfo] SET: "bleedingrev" "3c00265"
[ServerInfo] SET: "bleedingdate" "2012-08-15T19:55:59"
[ServerInfo] SET: "archosplayer/status" "Stable"
[ServerInfo] SET: "archosplayer/releaseversion" "3.11.2"
[ServerInfo] SET: "archosrecorder/status" "Stable"
[ServerInfo] SET: "archosrecorder/releaseversion" "3.11.2"
[ServerInfo] SET: "archosrecorder.8mb/status" "Stable"
[ServerInfo] SET: "archosrecorder.8mb/releaseversion" "3.11.2"
[ServerInfo] SET: "archosrecorderv2/status" "Stable"
[ServerInfo] SET: "archosrecorderv2/releaseversion" "3.11.2"
[ServerInfo] SET: "archosfmrecorder/status" "Stable"
[ServerInfo] SET: "archosfmrecorder/releaseversion" "3.11.2"
[ServerInfo] SET: "archosfmrecorder.8mb/status" "Stable"
[ServerInfo] SET: "archosfmrecorder.8mb/releaseversion" "3.11.2"
[ServerInfo] SET: "archosondiosp/status" "Stable"
[ServerInfo] SET: "archosondiosp/releaseversion" "3.11.2"
[ServerInfo] SET: "archosondiofm/status" "Stable"
[ServerInfo] SET: "archosondiofm/releaseversion" "3.11.2"
[ServerInfo] SET: "iriverh100/status" "Stable"
[ServerInfo] SET: "iriverh100/releaseversion" "3.11.2"
[ServerInfo] SET: "gogearhdd1630/status" "Unstable"
[ServerInfo] SET: "gogearhdd1630/releaseversion" ""
[ServerInfo] SET: "gogearhdd6330/status" "Unstable"
[ServerInfo] SET: "gogearhdd6330/releaseversion" ""
[ServerInfo] SET: "gogearsa9200/status" "Unstable"
[ServerInfo] SET: "gogearsa9200/releaseversion" ""
[ServerInfo] SET: "iriverh120/status" "Stable"
[ServerInfo] SET: "iriverh120/releaseversion" "3.11.2"
[ServerInfo] SET: "iriverh300/status" "Stable"
[ServerInfo] SET: "iriverh300/releaseversion" "3.11.2"
[ServerInfo] SET: "iriverh10_5gb/status" "Stable"
[ServerInfo] SET: "iriverh10_5gb/releaseversion" "3.11.2"
[ServerInfo] SET: "iriverh10_5gb.mtp/status" "Stable"
[ServerInfo] SET: "iriverh10_5gb.mtp/releaseversion" "3.11.2"
[ServerInfo] SET: "iriverh10/status" "Stable"
[ServerInfo] SET: "iriverh10/releaseversion" "3.11.2"
[ServerInfo] SET: "ipod1g2g/status" "Stable"
[ServerInfo] SET: "ipod1g2g/releaseversion" "3.11.2"
[ServerInfo] SET: "ipod3g/status" "Stable"
[ServerInfo] SET: "ipod3g/releaseversion" "3.11.2"
[ServerInfo] SET: "ipod4g/status" "Stable"
[ServerInfo] SET: "ipod4g/releaseversion" "3.11.2"
[ServerInfo] SET: "ipodcolor/status" "Stable"
[ServerInfo] SET: "ipodcolor/releaseversion" "3.11.2"
[ServerInfo] SET: "ipodvideo/status" "Stable"
[ServerInfo] SET: "ipodvideo/releaseversion" "3.11.2"
[ServerInfo] SET: "ipodmini1g/status" "Stable"
[ServerInfo] SET: "ipodmini1g/releaseversion" "3.11.2"
[ServerInfo] SET: "ipodmini2g/status" "Stable"
[ServerInfo] SET: "ipodmini2g/releaseversion" "3.11.2"
[ServerInfo] SET: "ipodnano1g/status" "Stable"
[ServerInfo] SET: "ipodnano1g/releaseversion" "3.11.2"
[ServerInfo] SET: "ipodnano2g/status" "Unstable"
[ServerInfo] SET: "ipodnano2g/releaseversion" ""
[ServerInfo] SET: "iaudiox5/status" "Stable"
[ServerInfo] SET: "iaudiox5/releaseversion" "3.11.2"
[ServerInfo] SET: "iaudiox5.v/status" "Stable"
[ServerInfo] SET: "iaudiox5.v/releaseversion" "3.11.2"
[ServerInfo] SET: "iaudiom5/status" "Stable"
[ServerInfo] SET: "iaudiom5/releaseversion" "3.11.2"
[ServerInfo] SET: "iaudiom3/status" "Stable"
[ServerInfo] SET: "iaudiom3/releaseversion" "3.11.2"
[ServerInfo] SET: "gigabeatfx/status" "Stable"
[ServerInfo] SET: "gigabeatfx/releaseversion" "3.11.2"
[ServerInfo] SET: "gigabeats/status" "Unstable"
[ServerInfo] SET: "gigabeats/releaseversion" ""
[ServerInfo] SET: "ondavx747/status" "Unusable"
[ServerInfo] SET: "ondavx747/releaseversion" ""
[ServerInfo] SET: "ondavx747p/status" "Unusable"
[ServerInfo] SET: "ondavx747p/releaseversion" ""
[ServerInfo] SET: "ondavx777/status" "Unusable"
[ServerInfo] SET: "ondavx777/releaseversion" ""
[ServerInfo] SET: "sansae200/status" "Stable"
[ServerInfo] SET: "sansae200/releaseversion" "3.11.2"
[ServerInfo] SET: "sansae200v2/status" "Stable"
[ServerInfo] SET: "sansae200v2/releaseversion" "3.11.2"
[ServerInfo] SET: "sansac200/status" "Stable"
[ServerInfo] SET: "sansac200/releaseversion" "3.11.2"
[ServerInfo] SET: "sansac200v2/status" "Stable"
[ServerInfo] SET: "sansac200v2/releaseversion" "3.11.2"
[ServerInfo] SET: "sansafuze/status" "Stable"
[ServerInfo] SET: "sansafuze/releaseversion" "3.11.2"
[ServerInfo] SET: "sansafuzev2/status" "Stable"
[ServerInfo] SET: "sansafuzev2/releaseversion" "3.11.2"
[ServerInfo] SET: "sansafuzeplus/status" "Unstable"
[ServerInfo] SET: "sansafuzeplus/releaseversion" ""
[ServerInfo] SET: "sansaclip/status" "Stable"
[ServerInfo] SET: "sansaclip/releaseversion" "3.11.2"
[ServerInfo] SET: "sansaclipv2/status" "Stable"
[ServerInfo] SET: "sansaclipv2/releaseversion" "3.11.2"
[ServerInfo] SET: "sansaclipplus/status" "Stable"
[ServerInfo] SET: "sansaclipplus/releaseversion" "3.11.2"
[ServerInfo] SET: "sansaclipzip/status" "Unstable"
[ServerInfo] SET: "sansaclipzip/releaseversion" ""
[ServerInfo] SET: "sansam200v4/status" "Unusable"
[ServerInfo] SET: "sansam200v4/releaseversion" ""
[ServerInfo] SET: "mrobe100/status" "Unstable"
[ServerInfo] SET: "mrobe100/releaseversion" ""
[ServerInfo] SET: "samsungyh820/status" "Unstable"
[ServerInfo] SET: "samsungyh820/releaseversion" ""
[ServerInfo] SET: "samsungyh920/status" "Unstable"
[ServerInfo] SET: "samsungyh920/releaseversion" ""
[ServerInfo] SET: "samsungyh925/status" "Unstable"
[ServerInfo] SET: "samsungyh925/releaseversion" ""
[ServerInfo] SET: "cowond2/status" "Unstable"
[ServerInfo] SET: "cowond2/releaseversion" ""
[ServerInfo] SET: "vibe500/status" "Stable"
[ServerInfo] SET: "vibe500/releaseversion" "3.11.2"
[ServerInfo] SET: "mpiohd200/status" "Unstable"
[ServerInfo] SET: "mpiohd200/releaseversion" ""
[RbUtil] updating current settings
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "sansaclipzip/bootloadermethod" "ams"
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "sansaclipzip/bootloadermethod" "ams"
[Settings] GET U: "platform" "sansaclipzip"
[Settings] GET U: "mountpoint" "F:/"
    (Last message repeated 3 times.)
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "sansaclipzip/brand" "Sandisk"
[Settings] GET U: "platform" "sansaclipzip"
[ServerInfo] GET: "sansaclipzip/status" "Unstable"
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "sansaclipzip/name" "Sansa Clip Zip"
[Utils] Volume name of "F:/" is "SANSA CLIPZ"
[Settings] GET U: "platform" "sansaclipzip"
[ServerInfo] GET: "sansaclipzip/releaseversion" ""
[Settings] GET U: "platform" "sansaclipzip"
    (Last message repeated 3 times.)
[SystemInfo] GET: "sansaclipzip/buildserver_modelname" "sansaclipzip"
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "sansaclipzip/manualname" ""
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "manual_url" "http://download.rockbox.org/manual/%MANUALBASENAME%.%EXTENSION%"
[Settings] GET U: "platform" "sansaclipzip"
    (Last message repeated 2 times.)
[SystemInfo] GET: "sansaclipzip/buildserver_modelname" "sansaclipzip"
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "sansaclipzip/manualname" ""
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "manual_url" "http://download.rockbox.org/manual/%MANUALBASENAME%.%EXTENSION%"
[Settings] GET U: "proxytype" "none"
    (Last message repeated 2 times.)
"" "" "" -1
[Settings] GET U: "cachepath" "C:\DOCUME~1\zolo\LOCALS~1\Temp"
[Settings] GET U: "offline" "false"
[Settings] GET U: "rbutil_version" "v1.2.14"
[Settings] GET U: "platform" "sansaclipzip"
[Settings] GET U: "mountpoint" "F:/"
    (Last message repeated 2 times.)
[Settings] GET U: "platform" "sansaclipzip"
[SystemInfo] GET: "rbutil_url" "http://download.rockbox.org/rbutil/"
[Settings] GET U: "offline" "false"
[HTTP] GET URI "http://download.rockbox.org/rbutil/win32/"
[HTTP] cache DISABLED
[HTTP] downloading to buffer.
[HTTP] GET scheduled:    4
[HTTP] Request started:  3 Header req: -1 Get req: 4
[HTTP] Request finished: 3 Error: false pending requests: true
[HTTP] Request started:  4 Header req: -1 Get req: 4
[HTTP] Request finished: 4 Error: false pending requests: false
[RbUtilQt] Checking for update
[Utils] comparing version strings "1.2.14" and "Parent Directory"
[Utils] comparing version strings "1.2.14" and "RockboxUtility-v1.2.11.zip"
[Utils] comparing version strings "1.2.14" and "RockboxUtility-v1.2.12.zip"
[Utils] comparing version strings "1.2.14" and "RockboxUtility-v1.2.13.zip"
[Utils] comparing version strings "1.2.14" and "RockboxUtility-v1.2.14.zip"
[InfoWidget] updating server info
[Settings] GET U: "mountpoint" "F:/"
[InfoWidget] updating server info
[Settings] GET U: "mountpoint" "F:/"
[Settings] GET U: "cachepath" "C:\DOCUME~1\zolo\LOCALS~1\Temp"
[System] Searching for USB devices
[System] USB VID: 046d, PID: c501
[System] USB VID: 05e3, PID: 0608
[System] USB VID: 062a, PID: 0102
    (Last message repeated 3 times.)
[System] USB VID: 0781, PID: 74e5
[System] USB VID: 1a40, PID: 0101
[System] USB VID: 1bcf, PID: 0c31
[Utils] Mounted on "A:/"
[Utils] Mounted on "C:/"
[Utils] Mounted on "D:/"
[Utils] Mounted on "E:/"
[Utils] Mounted on "F:/"
[Utils] cluster size for "A:/" 0
[Utils] Volume name of "A:/" is ""
[Utils] total disk space for "A:/" 0
[Utils] free disk space for "A:/" 0
[Utils] cluster size for "C:/" 4096
[Utils] Volume name of "C:/" is ""
[Utils] total disk space for "C:/" 39991275520
[Utils] free disk space for "C:/" 2373750784
[Utils] cluster size for "D:/" 0
[Utils] Volume name of "D:/" is ""
[Utils] total disk space for "D:/" 0
[Utils] free disk space for "D:/" 0
[Utils] cluster size for "E:/" 0
[Utils] Volume name of "E:/" is ""
[Utils] total disk space for "E:/" 0
[Utils] free disk space for "E:/" 0
[Utils] cluster size for "F:/" 4096
[Utils] Volume name of "F:/" is "SANSA CLIPZ"
[Utils] total disk space for "F:/" 7901298688
[Utils] free disk space for "F:/" 2167169024
[Settings] GET U: "cachepath" "C:\DOCUME~1\zolo\LOCALS~1\Temp"
[SysTrace] saving trace at 2012-08-15T11:35:40
    (Last message repeated 2 times.)
[SysTrace] saving trace at 2012-08-15T12:28:19
    (Last message repeated 2 times.)

saratoga:
According to that log, I don't think you ever installed the bootloader?

If so, then yes, you will not be able to run rockbox.  Go back into rockbox utility, and hit the bootloader install button. 

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version