Library is broken (c240, Panic).

[tofmin]

Talk to sandisk I guess.

IMHO it is not Sandisk fault. With original firmware WITHOUT RockBox i don't have any problems with uSD cards. When I install RB (and patch the bootloader), Sandisk firmware don't start when card is inserted.

[bluebrother]

Nope. Even if card is empty and i made a "fresh installation" of RB, device always stuck.

Since you've been using quotes, what do you mean by "fresh installation"? Did you erase the .rockbox folder before reinstalling? If not I'd remove all database files from the player first (/.rockbox/*.tcd). I'd also check both player and card for filesystem errors.

[saratoga]

IMHO it is not Sandisk fault. With original firmware WITHOUT RockBox i don't have any problems with uSD cards. When I install RB (and patch the bootloader), Sandisk firmware don't start when card is inserted.

Patching the firmware has literally zero impact on the OF, so its probably not related.

[tofmin]

Since you've been using quotes, what do you mean by "fresh installation"? Did you erase the .rockbox folder before reinstalling? If not I'd remove all database files from the player first (/.rockbox/*.tcd). I'd also check both player and card for filesystem errors.

Fresh means: I format Sansa and made a clean install. Tried both way: Utility and manual. Cards are fine - tested 4 different cards (2x 1GB, 2x 2GB). Card insterted = no Sandisk firmware.
But it's OK (for me), I very rarely use the Sandisk software so it's not a big problem.

Patching the firmware has literally zero impact on the OF, so its probably not related.

Sorry, I'm just saying how it is with me.

1. RB installed + uSD inserted = Sandisk firmware don't boot (stuck at "SanDisk").
2. Only OF installed = no problem with firmware and uSD cards.

[saratoga]

1. RB installed + uSD inserted = Sandisk firmware don't boot (stuck at "SanDisk").
2. Only OF installed = no problem with firmware and uSD cards.

Probably once you uninstall the rockbox bootloader you will find that it still doesn't work.

[tofmin]

Probably once you uninstall the rockbox bootloader you will find that it still doesn't work.

Darn, my poor english... Nope! OF means NO RB, NO BOOTLOADER, NOTHING. Only clean, new, fresh firmware from Sandisk.

Rockbox BL + RB installed + card in slot = Sandisk firmware don't start.
Original BL + original soft + card in slot = no problems.

Let it go, it's important that the RB is working well

[saratoga]

Probably once you uninstall the rockbox bootloader you will find that it still doesn't work.

Darn, my poor english... Nope! OF means NO RB, NO BOOTLOADER, NOTHING. Only clean, new, fresh firmware from Sandisk.

Yes I understood you.  I'm saying if you try it again you'll probably find that it doesn't work.   

[tofmin]

Yes I understood you.  I'm saying if you try it again you'll probably find that it doesn't work.   

I'm trying since yesterday. I installing RB and OF about 20+ times. Different builds, different methods, different uSD cards. Moreover, even checked 3 different computers

RB works well and i'm happy. Apparently, my Sansa has a temper.