Thank You for your continued support and contributions!
I'm having some trouble using the zenutils by zook.They worked great on my old computer, but on the other computers it doesn't work.I get the extremely inhelpful error message:C:\zen\bin>zen_cryptSystemet kan ikke kjore angitt program.Which means: System cannot run the specified program.Any ideas?
According to the Vision:M wiki page, the LCD panel is marked with the letters "V250QV", if that's the case its almost certainly in the same family as the LCD used in the Cowon D2: http://www.neodns.co.kr/specpdf/tft/xLTV250QV-F0B.pdfThe datasheet gives details of the necessary power-up and power-down sequences, which you might be able to locate in the original firmware (locating those was the starting point for the D2 port).The LTV250QV contains an S6F2002 LCD controller chip, but no information on this has been found yet. On the D2 this wasn't a problem, as the TCC7801 SoC provides its own interface to the LCD controller.EDIT: Also bear in mind you will need to establish how to control the backlight - this screen isn't visibile at all unless the backlight is turned on.
Is this one of the Zen players being worked on?http://www.geeks.com/details.asp?invtid=DAP-HD0018-N&cat=MP3
Quote from: bobbaluba on January 12, 2008, 06:03:17 AMI'm having some trouble using the zenutils by zook.They worked great on my old computer, but on the other computers it doesn't work.I get the extremely inhelpful error message:C:\zen\bin>zen_cryptSystemet kan ikke kjore angitt program.Which means: System cannot run the specified program.Any ideas?Which OS are you using? What is in your %PATH%? Did you already tried compiling the source yourself?
Quote from: mcuelenaere on January 12, 2008, 06:17:58 AMQuote from: bobbaluba on January 12, 2008, 06:03:17 AMI'm having some trouble using the zenutils by zook.They worked great on my old computer, but on the other computers it doesn't work.I get the extremely inhelpful error message:C:\zen\bin>zen_cryptSystemet kan ikke kjore angitt program.Which means: System cannot run the specified program.Any ideas?Which OS are you using? What is in your %PATH%? Did you already tried compiling the source yourself?Yes, but i can't figure out how to use cmake.This is my %path%:C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\WbemEDIT: I'm running winxp sp2
cmake -g "Visual Studio 8 2005"
I recently discovered my creative to have a cracked screen, and even though the rest of the device is functioning, I can't make any real use out of it. I was wondering, if I could donate it to the cause. Will my screenless Zen Vision M help you in the mission of porting over the Rockbox?
if (!shared::write_file(file, outbuf, sizeof(dword), len))
if (!shared::write_file(file, outbuf, false, sizeof(dword), len))
This sounds like good news.//But have you just reencoded the TL block?edit: I should learn to read, but still. good news! Hope to hear more soon
mcuelenaere: Are you able to run custom code on the ZVM?
Page created in 0.05 seconds with 21 queries.