Rockbox Development > New Ports
Creative Zen Vision:M
samsharp99:
I think that's as far as my contribution can go :S
I dont really know if there's anything more I can help with :(
aaronwi:
I did a firmware "update" from 1.61.01 to 1.61.01 on my ZVM while running "Device Monitoring Studio 5.1", and got this output, I don't believe anyone else used this program before; it gives a lot of info, files included are the packet view, and the URB data, in basic format. (the program says URB data is the raw usb packets decoded)
Here's the data
http://www.fileden.com/files/2007/7/3/1236670/urb%20basic%20and%20packet%20view.rar
contains the basic output from the URB data window, and the regular packet view data, both RARed..less then a megabyte
http://www.fileden.com/files/2007/7/3/1236670/URB%20view%20html%20format%20%20complete.rar
the full version of the URB data...about 191 MB, and RARed to 30 MB, (contains hex views of each packet)
aaronwi:
more goodies!!!
I couldn't get much from WpdMon, so I decided to try MtpMon, and here is the output
http://www.fileden.com/files/2007/7/3/1236670/verbose%20output%201.61.01%20to%201.61.01.rtf
I labeled each part of the log with #'s
http://www.fileden.com/files/2007/7/3/1236670/WPDmon%201.61.01%20to%201.61.01.rtf
was all I got from WpdMon, anyone know why It wouldn't log the initial upload?
I have XP sp2 and WMP11, by the way
also, in the installer, is the firmware nk.bin compressed/encrypted or anything, or can I directly modify it,
or is it possible to modify nk.bin when its in the temp folder, I tried before, but I believe its just overwritten just before the update process.
samsharp99:
maybe if you were quick enough?!?! :P
wantondstrction:
--- Quote from: aaronwi on July 04, 2007, 12:20:37 PM ---more goodies!!!
I couldn't get much from WpdMon, so I decided to try MtpMon, and here is the output
http://www.fileden.com/files/2007/7/3/1236670/verbose%20output%201.61.01%20to%201.61.01.rtf
I labeled each part of the log with #'s
http://www.fileden.com/files/2007/7/3/1236670/WPDmon%201.61.01%20to%201.61.01.rtf
was all I got from WpdMon, anyone know why It wouldn't log the initial upload?
I have XP sp2 and WMP11, by the way
also, in the installer, is the firmware nk.bin compressed/encrypted or anything, or can I directly modify it,
or is it possible to modify nk.bin when its in the temp folder, I tried before, but I believe its just overwritten just before the update process.
--- End quote ---
Did you make sure to turn on all the monitors in WPDmon? If not, try going to the Monitor tab in wpdmon.exe and turn all of them on. Also, if you delete wpdmon.htm that's in the exe folder, it'll give you an html readout that doesn't do stupid stuff like cut off parts. If you ever wanna clear it out, just delete it and it'll make a new one.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version