Support and General Use > Audio Playback, Database and Playlists

Files in MicroSD card aren't being shown in File Browser or Database on Clip+

<< < (11/12) > >>

marc2003:
you really should try the current build rather than something that is 6 months old....

Robisan:

--- Quote from: marc2003 on April 29, 2011, 09:40:15 PM ---you really should try the current build rather than something that is 6 months old....

--- End quote ---

D'oh! Right you are. Current build solved the problem.  :-[

aussieguy:
Once I moved to 3.8.1 from 3.8 this problem disappeared.

Thanks Rockbox guys.



--- Quote from: aussieguy on January 18, 2011, 03:16:33 AM ---I am having this same problem. I have a
      Sansa e280 running Rockbox 3.7
      Sansa Clip+ running 3.7.2, and now running r29082-110118
      Sandisk microSD 8gb
      Sandisk microSD 32gb

The problem is that the Clip+ running 3.7.2 or r29082-110118 does not recognise the 32gb microSD. The Clip+ running 3.7.2 or r29082-110118 will see the 8gb microSD

Running the original firmware the Clip+ will see the microSD 32gb card without problem.

Interestingly enough the Sansa e280 running RB 3.7, will recognise the 32gb microSD and the 8gb microSD.

When I insert the 32gb microSD card into the Clip+ running 3.7.2 or r29082-110118 the disk use symbol will flash up, but the word <microSD> will not appear in the file list.

Looking under Rockbox Info it says "HD1 not present".

I tried formatting the microSD with mkfs.vfat under linux with the option -F 32, to have a 32bit file allocation table, but that made no difference.



--- End quote ---

rafs:
Hi
I have Sansa clip+4 GB and rockbox 3.9 stable. I have trouble,Kingston 8 GB MicroSDHC card aren't being shown in File Browser or Database. I have Kingston 2 GB MicroSDHC card too and it's ok. Sansa original firmware see it 8gb and 2gb cards, Rockbox 2gb only. What's up? any ideas?

saratoga:

--- Quote from: rafs on August 09, 2011, 05:37:33 PM ---Hi
I have Sansa clip+4 GB and rockbox 3.9 stable. I have trouble,Kingston 8 GB MicroSDHC card aren't being shown in File Browser or Database. I have Kingston 2 GB MicroSDHC card too and it's ok. Sansa original firmware see it 8gb and 2gb cards, Rockbox 2gb only. What's up? any ideas?


--- End quote ---

You could try the current build, or downgrade to 3.8.1 and see if either work.  But since few people have reported this problem with 3.9 I'm not sure what else you can try.

Navigation

[0] Message Index

[#] Next page

[*] Previous page