Support and General Use > Audio Playback, Database and Playlists
Files in MicroSD card aren't being shown in File Browser or Database on Clip+
tristan:
Hi,
I have the same issue with my Sansa Fuze v2 + 16GB microSDHC. I tried to install the current build to r28932. As of now it works OK. microSDHC is now appears on Files and Database.
This problem has been resolved.
Thanks.
z8080:
Hi!
I still having this issue with my Sansa Clip Plus + 16GB Transcend microSDHC card !
There is all available for me debug information:
Player model -- SanDisk Sansa Clip Plus 4Gb
MicroSDHC card model -- Transcend 16Gb class 2, TS16GUSDHC2
Rockbox daily build version: r29037-110112 (problem still also exists with stable and all previous daily builds)
HD1: Not present
View disk info:
[microSD 1]
SU16G Rev 8.0
Prod: 10/2010
Ser#: 0x717B8833
M=03, O=SD
Blocks: 0x01DACC00
Speed: 25.0Mbit/s
Taac: 10.0ms
Nsac: 0 clk
R2W: *2
IRmax: 60..80 mA
IWmax: 35..35 mA
NOTE: In custom RockBox builds with USB support card is ALWAYS detected after player disconnection from USB port.
After powering player off and on card IS NOT detected. In these both cases information in "Debug - View disk info" menu still the same, as posted.
NOTE 2: Sometimes (if card is detected) I can see corruption of screen font bitmaps (digital garbage in place of letters), but playback of music still OK.
Thank you for reply!
----
Link to created bug report:
http://www.rockbox.org/tracker/task/11870
knopfsocke:
Hi,
I also having this issue with my Sansa Fuze.
I can not see the microSD in the file browser. If I transfer files from my Ubuntu workstation
to the Fuze, after 1-2 minutues the file system will be automatically remounted readonly.
I already tried a file system check and formated the card again. No change. Switching to
the Sandisk OS, the card seams to work fine. :o
Rockbox Version 3.7.1 (stable)
Sansa Fuze V1 - 8GB
Sandisk 16GB MicroSDHC
View Disk Info:
-------------------
[microSD 1]
SU16G Rev 8.0
Ser#: xxxxxx
M=03, O=SD
Blocks: 0x01 DACC00
Speed: 25.0 Mbit/s
Taac: 10.0ms
Nsac: 0 clk
R2W: *2
IRmax: 60..80mA
IQmax: 35..35mA
aussieguy:
I am having this same problem. I have a
Sansa e280 running Rockbox 3.7
Sansa Clip+ running 3.7.2, and now running r29082-110118
Sandisk microSD 8gb
Sandisk microSD 32gb
The problem is that the Clip+ running 3.7.2 or r29082-110118 does not recognise the 32gb microSD. The Clip+ running 3.7.2 or r29082-110118 will see the 8gb microSD
Running the original firmware the Clip+ will see the microSD 32gb card without problem.
Interestingly enough the Sansa e280 running RB 3.7, will recognise the 32gb microSD and the 8gb microSD.
When I insert the 32gb microSD card into the Clip+ running 3.7.2 or r29082-110118 the disk use symbol will flash up, but the word <microSD> will not appear in the file list.
Looking under Rockbox Info it says "HD1 not present".
I tried formatting the microSD with mkfs.vfat under linux with the option -F 32, to have a 32bit file allocation table, but that made no difference.
mlt:
I don't see how I can delete my post. It turned out that I incorrectly updated firmware. 32Gb card works for me quite well with r29093-110119. Thanks to all developers who make this project possible!!!
While I was quite happy, I got "Divide by zero at 3080EB08" while listening to ape+cue . Kind of sad... I'll see where to report it.. I'm not sure if I'd get it with stable firmware.
I'm also having difficulties with Clip+ (AMSv2 variant 1) and Transcend 32Gb Class 2 card (SU32G Rev 8.0, Prod 12/2010,). I'm a newbie user and I have no coding experience for these devices, but I'd like to help at least by testing firmware/providing debug data. I guess FS#11798 should be reopened.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version