Welcome to the Rockbox Technical Forums!
Hello,the normal steps to build sbtoelf is to have an up to date svn checkout and to type make in utils/sbtools. You error definitely indicate something wrong; are you sure you have the sbtoelf.c ?Then you should follow the steps in the wiki SansaFuzePlusPort page, everything is written. The directory in which is happen is not important, a fresh one will do.
root@debian:/home/jean-louis/Informatique/Rockboxfuse+/rockbox/build# ../utils/imx_hid_recovery/imx_hid_recovery 1024 bootloader.sbTransfer size: 1024ret 0root@debian:/home/jean-louis/Informatique/Rockboxfuse+/rockbox/build#
[ 885.657178] usb 1-2: new high speed USB device using ehci_hcd and address 11[ 885.772049] usb 1-2: New USB device found, idVendor=066f, idProduct=3780[ 885.772058] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 885.772065] usb 1-2: Product: ROM Recovery[ 885.772069] usb 1-2: Manufacturer: Sigmatel, Inc.[ 885.773332] generic-usb: probe of 0003:066F:3780.0004 failed with error -22[ 1151.536349] usb 1-2: USB disconnect, address 11[ 1184.911095] usb 1-2: new high speed USB device using ehci_hcd and address 12[ 1190.021141] usb 1-2: device descriptor read/64, error -71[ 1195.232065] usb 1-2: device descriptor read/64, error -71[ 1195.435091] usb 1-2: new high speed USB device using ehci_hcd and address 13[ 1200.545136] usb 1-2: device descriptor read/64, error -71[ 1205.756061] usb 1-2: device descriptor read/64, error -71[ 1205.959102] usb 1-2: new high speed USB device using ehci_hcd and address 14[ 1209.184143] usb 1-2: device not accepting address 14, error -71[ 1209.235413] hub 1-0:1.0: unable to enumerate USB device on port 2[ 1215.166156] usb 1-2: new high speed USB device using ehci_hcd and address 16[ 1220.276168] usb 1-2: device descriptor read/64, error -71[ 1225.487141] usb 1-2: device descriptor read/64, error -71[ 1225.690165] usb 1-2: new high speed USB device using ehci_hcd and address 17[ 1230.800052] usb 1-2: device descriptor read/64, error -71[ 1233.338240] hub 1-0:1.0: unable to enumerate USB device on port 2[ 1239.412152] usb 1-2: new high speed USB device using ehci_hcd and address 18[ 1244.522150] usb 1-2: device descriptor read/64, error -71[ 1249.733077] usb 1-2: device descriptor read/64, error -71[ 1249.936105] usb 1-2: new high speed USB device using ehci_hcd and address 19[ 1250.744340] hub 1-0:1.0: unable to enumerate USB device on port 2[ 1261.633078] usb 1-2: new high speed USB device using ehci_hcd and address 20[ 1266.743069] usb 1-2: device descriptor read/64, error -71[ 1271.954073] usb 1-2: device descriptor read/64, error -71[ 1272.157078] usb 1-2: new high speed USB device using ehci_hcd and address 21[ 1277.267168] usb 1-2: device descriptor read/64, error -71[ 1282.478151] usb 1-2: device descriptor read/64, error -71[ 1282.681140] usb 1-2: new high speed USB device using ehci_hcd and address 22[ 1286.033143] usb 1-2: device not accepting address 22, error -71[ 1286.084330] hub 1-0:1.0: unable to enumerate USB device on port 2[ 1290.087183] usb 1-2: new high speed USB device using ehci_hcd and address 24[ 1295.197139] usb 1-2: device descriptor read/64, error -71[ 1300.408075] usb 1-2: device descriptor read/64, error -71[ 1300.611121] usb 1-2: new high speed USB device using ehci_hcd and address 25[ 1305.721057] usb 1-2: device descriptor read/64, error -71[ 1310.932142] usb 1-2: device descriptor read/64, error -71[ 1311.135048] usb 1-2: new high speed USB device using ehci_hcd and address 26[ 1316.541049] usb 1-2: device not accepting address 26, error -71[ 1316.643103] usb 1-2: new high speed USB device using ehci_hcd and address 27[ 1322.049060] usb 1-2: device not accepting address 27, error -71[ 1322.049097] hub 1-0:1.0: unable to enumerate USB device on port 2[ 1323.576058] usb 1-5: new high speed USB device using ehci_hcd and address 28[ 1328.686082] usb 1-5: device descriptor read/64, error -71[ 1333.897118] usb 1-5: device descriptor read/64, error -71[ 1334.100098] usb 1-5: new high speed USB device using ehci_hcd and address 29[ 1339.210124] usb 1-5: device descriptor read/64, error -71[ 1343.022333] hub 1-0:1.0: unable to enumerate USB device on port 5[ 1345.970065] usb 1-5: new high speed USB device using ehci_hcd and address 30[ 1351.080122] usb 1-5: device descriptor read/64, error -71[ 1356.291129] usb 1-5: device descriptor read/64, error -71[ 1356.494118] usb 1-5: new high speed USB device using ehci_hcd and address 31[ 1361.604119] usb 1-5: device descriptor read/64, error -71[ 1366.815142] usb 1-5: device descriptor read/64, error -71[ 1367.018124] usb 1-5: new high speed USB device using ehci_hcd and address 32[ 1372.424057] usb 1-5: device not accepting address 32, error -71[ 1372.526073] usb 1-5: new high speed USB device using ehci_hcd and address 33[ 1377.932139] usb 1-5: device not accepting address 33, error -71[ 1377.932177] hub 1-0:1.0: unable to enumerate USB device on port 5[ 1378.174179] usb 4-1: new full speed USB device using uhci_hcd and address 2[ 1383.286094] usb 4-1: device descriptor read/64, error -71[ 1388.498142] usb 4-1: device descriptor read/64, error -71[ 1388.701175] usb 4-1: new full speed USB device using uhci_hcd and address 3[ 1393.812150] usb 4-1: device descriptor read/64, error -71[ 1399.023136] usb 4-1: device descriptor read/64, error -71[ 1399.226156] usb 4-1: new full speed USB device using uhci_hcd and address 4[ 1404.632075] usb 4-1: device not accepting address 4, error -71[ 1404.734138] usb 4-1: new full speed USB device using uhci_hcd and address 5[ 1410.140052] usb 4-1: device not accepting address 5, error -71[ 1410.140095] hub 4-0:1.0: unable to enumerate USB device on port 1[ 1482.158176] usb 1-5: new high speed USB device using ehci_hcd and address 34[ 1482.273176] usb 1-5: New USB device found, idVendor=0781, idProduct=74e0[ 1482.273184] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5[ 1482.273191] usb 1-5: Product: Sansa Fuze+[ 1482.273196] usb 1-5: Manufacturer: SanDisk[ 1482.273200] usb 1-5: SerialNumber: 0000000100001C150002DCDF27F55C15[ 1482.274204] scsi8 : usb-storage 1-5:1.0[ 1483.274939] scsi 8:0:0:0: Direct-Access SanDisk Sansa Fuze+ 0100 PQ: 0 ANSI: 4[ 1483.275556] scsi 8:0:0:1: Direct-Access SanDisk Sansa Fuze+ 0100 PQ: 0 ANSI: 4[ 1483.279931] sd 8:0:0:0: [sdb] 7748864 2048-byte logical blocks: (15.8 GB/14.7 GiB)[ 1483.280521] sd 8:0:0:0: [sdb] Write Protect is off[ 1483.280529] sd 8:0:0:0: [sdb] Mode Sense: 3e 00 00 00[ 1483.285855] sd 8:0:0:0: [sdb] Incomplete mode parameter data[ 1483.285861] sd 8:0:0:0: [sdb] Assuming drive cache: write through[ 1483.288148] sd 8:0:0:1: [sdc] Attached SCSI removable disk[ 1483.292763] sd 8:0:0:0: [sdb] 7748864 2048-byte logical blocks: (15.8 GB/14.7 GiB)[ 1483.294408] sd 8:0:0:0: [sdb] Incomplete mode parameter data[ 1483.294413] sd 8:0:0:0: [sdb] Assuming drive cache: write through[ 1483.295711] sdb: sdb1[ 1483.298043] sd 8:0:0:0: [sdb] 7748864 2048-byte logical blocks: (15.8 GB/14.7 GiB)[ 1483.299414] sd 8:0:0:0: [sdb] Incomplete mode parameter data[ 1483.299418] sd 8:0:0:0: [sdb] Assuming drive cache: write through[ 1483.299422] sd 8:0:0:0: [sdb] Attached SCSI removable disk[ 1483.727360] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive![ 1561.041434] WARNING! power/level is deprecated; use power/control instead[ 1561.100383] usb 1-5: USB disconnect, address 34
default: lcd_kind = LCD_KIND_9325;
default: lcd_kind = LCD_KIND_7783;
If you are motivated, you could try to bisect to see which revision of the svn caused that. You can also try to change this in lcd-fuzeplus.c:replaceCode: [Select]default: lcd_kind = LCD_KIND_9325;byCode: [Select]default: lcd_kind = LCD_KIND_7783;
man svn
Page created in 0.091 seconds with 20 queries.