Rockbox Development > New Ports
Sansa Fuze+
Xanikseo:
with the latest updates, the lag when playing music has disappeared!
scratch that. I must have just been lucky. I charged the thing up and now the problem is as it was before
metaphys:
following the last keymap update with the implementation of the menu key (on the back arrow key) there has been a few screen made unusable (bookmark, recording, EQ). Those have been corrected. Please report any remaining issue.
pamaury:
Hi all,
This is a new release candidate for the bootloader: it will become V2 if nobody reports any new issues. The changes are minimal: slightly faster boot and it should fix some hanging boot issues that happen from time to time. Please feel free to test it and report success/failures.
https://www.dropbox.com/s/w9cnnr4w5m3edpd/fuzep_rb_firmware_v2.sb
Julian67:
--- Quote from: pamaury on September 27, 2013, 07:52:38 AM ---Hi all,
This is a new release candidate for the bootloader....Please feel free to test it and report success/failures.
--- End quote ---
Success!
I had some problems at first as the Sansa firmware did not "see" the new firmware.sb file after I copied it to device root. In the end I switched off the player, held down volume button and attached the USB cable so the device was in Sansa's USB mode, not Rockbox's. Then I copied the firmware again. The next time I booted into Sansa firmware in playback mode it did update the firmware with the V2 bootloader.
It does boot noticeably faster.
Xanikseo:
Disabling crossfade seems to prevent the playback lagging on sd card, without needing to boost cpu
Also, flashed the new bootloader successfully. No problems so far!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version