Rockbox Development > New Ports

Sansa Fuze+

<< < (129/162) > >>

rba:
Yes !! the wake up alarm and the charging in the usb are working.

Can I use this bootloader in a sansa fuze that has many bugs ?

Thank's a lot

pamaury:
I have committed some recording fixes. Apparently the recording volume setting were broken by a recent general rework, which explain the near silence: volume had to be set close to maximum to hear something...

pamaury:
Thanks for the feedback of some people, apparently is it confirmed that battery charging works with the new bootloader. On the other hand, alarm seems random. I opened a bug report, please add any information here: http://www.rockbox.org/tracker/task/12879.
I also realised that there is a problem with the volume keys, I know the issue but opened a bug report here: http://www.rockbox.org/tracker/task/12880.
Any other issues should also go on flyspray please: http://www.rockbox.org/tracker/, try to put "[fuze+]" or correctly set the player to Sansa Fuze+ in it.
It has been reported that recording works too, but if you encounter any corner case, please report it on flyspray too.
Thanks

elvi2008:
I have a problem with Sansa Fuze +. I've used Rockbox for a year, yesterday it stopped to turn on with the power button, but turns off with the same button.
It turns on only when connected via USB to any device(tuner, TV, PC), the computer says USB device is not recognized and there is nothing to see or to do.
I have managed to access native Sansa about 5 times, the picture jumped on the setup menu, but after several clicks I've entered setup menu to check msc usb settings and the picture was stable. The same result with the computer. Now i can't access native firmware. If I just connect with the computer via USb the player turns on and I can use it. While pressed volume- button and USB connected it doesn't connect or turn on. If I release volume- button Rockbox turns on and the player works fine even if disconnected from the computer. Then I turn it off and can't turn it on again and I have to connect it to the computer again. After all this a new problem appeared: volume+ button started to block the display. I can change volume only via volume settings. The player hasn't been covered with water or fallen.

pamaury:
@elvi2008: be warned that reposting while your post has been removed is considered very rude ! I will not remove it again but I will ask to not *NOT* post again on the same problem. For these kinds of problems it's better to use flyspray (http://www.rockbox.org/tracker) or even IRC (http://www.rockbox.org/irc/). That being said, my only advise is: come on IRC, it looks like a hardware problem.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version