Rockbox Development > New Ports

Sansa Fuze+

<< < (92/162) > >>

Enclavejedi13:
I have the same problem as megal0maniac, except my internal memory is still intact. But I am unable to charge my Sansa Fuze+ at all. When I plug it in, it still shows the bootloader usb mode, but I can't even turn it on. What should I do?

pamaury:
You should boot into the OF using volume down.
I manage to write the epprom on the Fuze+ Jean-Louis sent me but currently it requires to short pins. I'm still trying to find a software only way.

By the way I think I found the reason of the tuner bug. I committed a fix but did not test it yet so if someone can confirm/invalidate, it would be nice.

megal0maniac:
I have submitted an RMA request to Sandisk.
Problem is I can't find proof of purchase and there's a scratch inside the cover from when I opened it, on the transparent plastic over the screen.  ::)
So we'll see whether or not they replace it.

If they don't, I'm all for shorting pins out. It isn't like I could really make it worse...
In a silly way, I'm almost hoping that Sandisk don't replace it so I can try and fix it myself. ;D

halonachos117:
I have not noticed any bug that have been *fixed*  :'( Maybe next time it will actually work.
Now, after the screen goes black, I can return to the radio screen, but the signal strength turns to 0dBuV, even though the signal sound great. If one tries to change the station, it freezes just like before. However, now you can return to the main menu, and power down. You can also power down from directly inside the radio screen.

And just like before, once I set my radio to some preset, I can't set the radio screen to seek to non-preset stations. As soon as I enter/return to the radio screen, it switches from "scan" mode to "preset" mode. I can set it back to "scan" mode, but that would be useless, since it will go back to "preset" mode as I describe above.

PS: I'm using version d26a35d-120509, if that make a difference.

PS2: Once again, thanks for being awesome, Pamaury!
Post Merge: May 09, 2012, 07:26:34 PMUpdate: Okay, so I've decided to try my luck, and updated just a few minuets ago. Now it seems to work much better, although I've only tested it for a few minuets. Perhaps your updateed radio code hadn't made it into the automated builds yet?

Anyway, so far so good. I will continue to test and see if I can find any bugs.

pamaury:
Yes in fact I changed something after that along with some other things (pin use tracking and I fixed some could which would disable the gpio output on the fm i2c pins!). I have tested it today and the radio works reliably now. I also implemented RDS support but my fuze+ doesn't seem to have a good enough reception to meet our RDS parser requirement. I have implement a better RDS parser (see patch http://gerrit.rockbox.org/r/#/c/237/) but it needs discussion. I am interested in any feedback regarding RDS, am I the only one to have poor RDS reception ?

Navigation

[0] Message Index

[#] Next page

[*] Previous page