Rockbox Development > New Ports
Sansa Fuze+
gevaerts:
--- Quote from: Mystos on February 13, 2012, 02:58:53 PM ---If parametre USB Hide Internal Drive = YES - mounted internal memory. If USB Hide Internal Drive = NO - mounted SD card.
--- End quote ---
Are you sure about this? "USB Hide Internal Drive = YES" should show only the SD card, not the internal memory...
Mystos:
--- Quote from: gevaerts on February 13, 2012, 04:16:30 PM ---
--- Quote from: Mystos on February 13, 2012, 02:58:53 PM ---If parametre USB Hide Internal Drive = YES - mounted internal memory. If USB Hide Internal Drive = NO - mounted SD card.
--- End quote ---
Are you sure about this? "USB Hide Internal Drive = YES" should show only the SD card, not the internal memory...
--- End quote ---
Excuse me, I was mistaken.
You are right:
If parametre USB Hide Internal Drive = NO - mounted internal memory. If USB Hide Internal Drive = YES - mounted SD card.
Somebody works over the decision of this problem?
megal0maniac:
--- Quote from: Mystos on February 13, 2012, 04:23:06 PM ---If parametre USB Hide Internal Drive = NO - mounted internal memory. If USB Hide Internal Drive = YES - mounted SD card.
--- End quote ---
I can confirm this issue. Both drives show up fine in Linux, however.
Using Windows 7 SP1 x64
Mystos:
I am sorry for my bad English. I use the translator.
I do not know where to say of suggestion on development of functional. I will write while here.
Whether it is possible to add such function: when pleer is blocked the buttons of adjusting of volume were executed by the functions of "Play" and "Pause". This possibility must be in options (on/off). It would enable to put pleer on a pause not taking out him. It is not very enough now.
buckminster:
I noticed that the FFWD and Rewind buttons don't function properly during playback when the backlight is off and "First button press turns on backlight" is set to No. I'll hear a click for the key press and the backlight turns on, but I'll have to press the button again for it to FFWD or Rewind. Other button functions work as expected.
Don't know if this has been posted before and/or if this is a RB issue or specifically Fuze+. I tried to search here and under the bug tracker.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version