Welcome to the Rockbox Technical Forums!
SPDIF recording is being developed (slowly) by me right now. A rudimentary patch is available, but there are some bugs I need to get rid of.
Sullen,Interesting question. You have to enable optical out but it turns off when recording. mborus, have you noticed any significant impact on battery life? i haven't (but I haven't been paying attention to it).
Is having the optical out, required to record at this point, draining the battery more? I don't know the interworkings of the iRiver so I was wondering if this was added drain/strain on the battery. About how much time are you getting per charge or do you record with the wall wort plugged in?
mborus:Could you try the build whataboutbob posted and tell me if you still get wrong sample rates on the WAVs that used to be tagged with wrong sample rates? Could you also check with the diagnostic screen and check to be 100% percent sure the sample rate is never correct there either?
Woot! Looks like amiconn may have solved the hanging (DMA error) issue. I can't get recording to hang now anyways. If there's a signal loss now (eg when the cable is pulled out mid-recording), the recording pauses (the time keeps ticking, but the peakmeter disappears and the size pauses) until the signal's found again. This isn't obvious when it happens, but I imagine that's something they'll get to eventually. :-)Here's a precompiled build w/ the new patch for anyone that wants to help test: http://download.yousendit.com/CF490F1E480279DCReminder: you'll need to enable spdif out, and its prolly safest to reset settings...not in that order. :-)
Page created in 0.048 seconds with 21 queries.