Support and General Use > Recording
Recording Enhancements Pack
Mmmm:
--- Quote from: petur on June 19, 2006, 03:29:50 PM ---
--- Quote from: lurker on June 19, 2006, 08:47:21 AM ---I have "Show Recording Screen on Startup" set to "yes". When I startup, I'm immediately on the recording screen and everything is fine EXCEPT I can't monitor audio through the headphones. The level meters are responding and it in fact records just fine, I just can't hear a thing. To actually hear the audio, I need to press "Stop" to go to the "Recording Screen|Recording Settings" screen and then if I go back into the "Recording Screen", everything is fine.
This happens with headphones plugged into the remote or plugged directly into the main unit.
--- End quote ---
Just checked this and it works fine on my h340, so the cvs build used with line-in and mic should be ok. Just can't test spdif...
--- End quote ---
Works ok on mine too with the patch applied (but again no spdif test). Lurker...does it work properly with default settings?
petur:
--- Quote from: amoergosum on June 20, 2006, 05:23:38 AM ---Would it be possible to integrate AM-radio?
--- End quote ---
No, it's an FM radio chip
petur:
--- Quote from: petur on June 20, 2006, 03:18:28 AM ---Be warned that there's possibly lost samples in the filesplit (until I can investigate this). It should be save if you stay below 2GB and don't use the timesplit feature...
--- End quote ---
duh... false alarm, it was foobar acting up on me. I appended the wavs in audacity and it was a perfect match.
lurker:
--- Quote from: Mmmm on June 20, 2006, 07:06:41 AM ---
--- Quote from: petur on June 19, 2006, 03:29:50 PM ---
--- Quote from: lurker on June 19, 2006, 08:47:21 AM ---I have "Show Recording Screen on Startup" set to "yes". When I startup, I'm immediately on the recording screen and everything is fine EXCEPT I can't monitor audio through the headphones. The level meters are responding and it in fact records just fine, I just can't hear a thing. To actually hear the audio, I need to press "Stop" to go to the "Recording Screen|Recording Settings" screen and then if I go back into the "Recording Screen", everything is fine.
This happens with headphones plugged into the remote or plugged directly into the main unit.
--- End quote ---
Just checked this and it works fine on my h340, so the cvs build used with line-in and mic should be ok. Just can't test spdif...
--- End quote ---
Works ok on mine too with the patch applied (but again no spdif test). Lurker...does it work properly with default settings?
--- End quote ---
It seems that on my h140, the headphones don't get turned on for monitoring until I go from the "Recording Screen|Recording Settings" menu and select the "Recording Screen" option. That would appear why when it jumps to the "Recording Screen" at startup (without going through the menu), I don't have any audio out of the headphones. If I set "Show Recording Screen on Startup" to "no" and (therefore) enter the "Recording Screen" manually, all is fine.
Now that I know what's going on, it's just mostly annoying. I've been capturing sounds on the spur of the moment (which is why I use the "Show Recording Screen on Startup" set to "yes"). But to hear audio in the headphones, I have to press "Stop" to backup to the menu and press "Play" again to turn on the headphones.
I would guess (that at least on my h140) there's some initialization code for monitoring that's being skipped unless I manually go through the menu and press "Play". Note that the headphones are "dead", not "quiet", but "dead" (like a D/A or output stage is not turned on). When I go through the menu, the audio immediate jumps on.
Any other tests anyone can suggest?
whatboutbob:
--- Quote from: lurker on June 21, 2006, 07:55:51 AM ---Any other tests anyone can suggest?
--- End quote ---
Seeing as it is working for others, I would suggest that there's something specific about your setup that is breaking it...likely either your build, your settings or your unit (unlikely).
Have you tried resetting your settings to clean the slate then changing only the 'show recording screen on start up'? Let us know if that is still demonstrating the same problem. If its not, then change your options one at a time back to what they were pre-reset until you find the gremlin.
Are you running the headphones out of a remote btw, or out of the main unit?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version