Installation / Removal > Apple - Installation/Removal

Rockbox on a HFS+ and FAT32 iPod

(1/1)

tobix10:
Hi,
I've partitioned my iPod:
-Apple Partition Map
-25GB Music (HFS+)
-4.85GB ROCKBOX (FAT32)
[ Really, and its working  ;D ]
Everything like Apple OS, Linux is working, but when I try to load Rockbox from my FAT32-Partition I get the Error:  "Err: open failed"
Maybe its my fault because I don't know which partition I should choose in the config or Rockbox couldn't been loaded from an Apple-PartitionMap FAT32. :-[ ???
———
pdisk output:
Command (? for help): p

Partition map (with 512 byte blocks) on '/dev/disk1'
 #:                type name       length   base     ( size )
 1: Apple_partition_map Apple          63 @ 1       
 2:          Apple_MDFW firmware   512144 @ 64       (250.1M)
 3:           Apple_HFS disk     48565984 @ 512208   ( 23.2G)
 4:          DOS_FAT_32 rockbox   9526912 @ 49078192 (  4.5G)
 5:          Apple_Free                16 @ 58605104

Device block size=512, Number of Blocks=58605120 (27.9G)
DeviceType=0x0, DeviceId=0x0

————
Sorry,
I normally speak German.
THX

Llorean:
It sounds like you're using some other bootloader than the Rockbox bootloader, in which case you should ask the provider of that bootloader for help.

torne:
Rockbox does not understand Apple partition maps, only IBM PC MBR partitions. It cannot read HFS partitions either, so while it will *work* with a disk that has non-FAT MBR partitions (it ignores them) it can't access them either.

Navigation

[0] Message Index