Rockbox General > Rockbox General Discussion
Sansa Fuze V1 USB and Monkeys Audio
lefko:
Just got a 4g fuze from buy.com which was a v1. There was a comment somewhere about it being random, but I asked a question and the response was v1 I ordered and got a v1 so theres another point of info...
Anyway, the USB charge work around I read about does not appear to be working on my rockboxed fuze (Holding down select while plugging in the USB). This means I can not run rockbox with it plugged in at all as it reboots to sansa fw when USB is plugged in. Is this really the case? I seem to remember that on the e2xx series, the previous version of the fw where USB did not work I was able to get rockbox running when it was plugged in.
Also, I would have expected that it would be able to handle monkeysaudio, since it supports video, but it works the same as my e250 which is a pause about ever second or so.
gevaerts:
--- Quote from: lefko on March 09, 2010, 11:48:13 AM ---Anyway, the USB charge work around I read about does not appear to be working on my rockboxed fuze (Holding down select while plugging in the USB). This means I can not run rockbox with it plugged in at all as it reboots to sansa fw when USB is plugged in. Is this really the case? I seem to remember that on the e2xx series, the previous version of the fw where USB did not work I was able to get rockbox running when it was plugged in.
--- End quote ---
That should work. I don't have a fuze though, so I can't test here.
--- Quote ---Also, I would have expected that it would be able to handle monkeysaudio, since it supports video, but it works the same as my e250 which is a pause about ever second or so.
--- End quote ---
What compression level are you using? I'd expect monkeysaudio to play correctly up to -c3000 (i.e. "high")
funman:
--- Quote from: gevaerts on March 09, 2010, 12:08:32 PM ---
--- Quote from: lefko on March 09, 2010, 11:48:13 AM ---Anyway, the USB charge work around I read about does not appear to be working on my rockboxed fuze (Holding down select while plugging in the USB). This means I can not run rockbox with it plugged in at all as it reboots to sansa fw when USB is plugged in. Is this really the case? I seem to remember that on the e2xx series, the previous version of the fw where USB did not work I was able to get rockbox running when it was plugged in.
--- End quote ---
That should work. I don't have a fuze though, so I can't test here.
--- End quote ---
If rockbox is already booted, that'll work.
If the device is off, plugging usb will ALWAYS boot OF, no matter which buttons you press.
So the procedure is: Power on, boot rockbox, keep center button pressed, plug USB
saratoga:
http://download.rockbox.org/daily/manual/rockbox-sansafuze/rockbox-buildch3.html#x5-280003.1.3
Njones:
I'm having the same problem.
I have a v1 fuze with the latest Sansa OF and Rockbox 3.5.
With Rockbox booted up on the Fuze, I plug in the USB cable while holding down the select button on the Fuze and it switches over to the Sansa firmware? Is this a bug in the 3.5 Rockbox?
Navigation
[0] Message Index
[#] Next page
Go to full version