Rockbox General > Rockbox General Discussion

Absence of Charging Screen After Installing Vrs 3.4

<< < (2/2)

psycho_maniac:
im pretty sure its still charging. just shows a different screen. i believe they were able to use rockbox on the sansa now when you connect it to the pc//wall charger

saratoga:

--- Quote from: Spacedog2k5 on October 20, 2009, 09:38:24 PM ---I wasn't asking how to reboot the firmware. As I said, that no option (it was achieved by holding down the Power button for a few seconds) no longer works..

--- End quote ---

As I said above, that screen is in the original firmware.  If you want to see it, reboot out of rockbox and into the original firmware and you'll find its still there.  Rockbox doesn't change the original firmware.

torne:
Previously, Rockbox did not have full USB support on your player, so when you connected USB it would reboot to the original firmware for USB file transfer and charging.

3.4 now has USB support for your hardware, so this is no longer done: the USB cable graphic is Rockbox's USB connection screen. It will charge while USB is connected, and you can transfer files if you are connected to a PC.

If you want to reboot to the original firmware anyway, see the manual for how to do this.

Spacedog2k5:
That explains it, then, Torne. That was all I was looking for. Thank you for the help.  ;D Cheers..

Navigation

[0] Message Index

[*] Previous page