Support and General Use > Audio Playback, Database and Playlists

My Computer does not Recognise my Sansdisc e200 01.01.07p,

<< < (5/7) > >>

BruceHP:
You might try to reload the Bootloader.

If that doesn't work, you might have to start over by Uninstallling everything or even Formatting the player.

I have no idea what any of those messages mean.

Chronon:
Dasha, if you're seeing the Rockbox logo at boot time it means that Rockbox is booting.  Seeing the SanDisk directly after this means that Rockbox crashes immediately when you try to boot. 

I'm a bit curious about the fact that you tried to update the original firmware and it didn't work (you still have version 01.01.07p on your player). It's probably best at this point to try to get to a known state. If you follow the recovery instructions that I linked earlier then you should end up with a stock SanDisk setup (with no Rockbox bootloader installed).  Feel free to ask further questions about this.

Dasha:
Thanks Chonon can you detail how I do this please??

It's probably best at this point to try to get to a known state. If you follow the recovery instructions that I linked earlier

 Version [V01.01.07p] Is definitely still on my player!  Dasha :)

robin0800:
01.01.07 firmware is for the c200 players not the e200
Have you got the correct firmware for your player?

Dasha:
Thanks robin0800  :)That's a darn good question :-\" during Rockbox utility (last action)
As I was following Chronon's advice; I Downloaded Rockbox 1.2.2 Install / Run “Boot utility” / open / Etc / Unzipped all files to Settings\Temporary Internet Files\Content.IE5\DT58QUQ0\rbutilqt-v1.2.2[1]/  ???

At this point the utility Recognised my player as "Sansdisk e200" in the top line above "Complete Install of Rockbox" I also clicked Browse but the C200 was highlighted so I select e200 and continued with the install.
Then In the Rockbox Utility I clicked /Complete Install/ and then it came up / Download 3.3 successful /

In the Rockbox "Current Rockbox Build" Page all the various pictures's of compatible devices are identified? The Picture for the C200 is the one that is the same to look at as mine the e200 is a different device.
However I just went back to that page and both c200 and e200 have the same build version code number it is: " r22381"
So as you can see it's all very strange and for me totally confusing. Does this mean that I was sold an outdated Sansdisk c200 instead of the latest version e200 back nearly 3 years ago?? I just do not understand? Why me?? Dasha :-[ 

Navigation

[0] Message Index

[#] Next page

[*] Previous page