Rockbox General > Rockbox General Discussion

Sansa e250 + RB 3.3 = can't mount

(1/2) > >>

CyberSnipa:
Player: Sansa e250
RockBox version: 3.3

So far only tested (or experienced) on Fedora 11 x86_64. Other USB devices automount without a glitch (tried with a 4GB USB flash memory stick, and G1 phone).

Once the player is connected a USB male plug logo appears on the player screen. Running 'lsusb' shows that it is connected:
# lsusb | grep Sansa
Bus 001 Device 024: ID 0781:7421 SanDisk Corp. Sansa E200 series

However, 'fdisk -l' doesn't show it, and the device doesn't automount. Manual mount not possible either, since the system doesn't assign a device node to it.


aaron424:
I know there is an ubuntu bug with these exact symptoms, [url]http://forums.rockbox.org/index.php?topic=22086.msg152509#msg152509/url] but I do not know if it applies to Fedora. This explanation is all I can think of off the top of my head.

CyberSnipa:
Thanks for the link, however this may not apply to Fedora at all. I found no references to Sansa in those files and the symptoms are too weird.

I tested it with Windows Vista 32bit - didn't mount, Mac OSX - didn't mount, Fedora 11 x86_64 (on my laptop, different from my workstation) it only mounted partially, didn't recognize the add-on minisd card.

There's also another difference I noticed since the upgrade. Once connected to a computer, it will boot into RockBox and then after several seconds, it switches to the original Sansa interface. It's never done that before. And even that isn't constant, since sometimes it'll only show the USB plug in RockBox and other times it switches to Sansa interface.

aaron424:
Ok, at least we know its not an OS bug.

gevaerts:

--- Quote from: CyberSnipa on July 16, 2009, 12:11:01 PM ---There's also another difference I noticed since the upgrade. Once connected to a computer, it will boot into RockBox and then after several seconds, it switches to the original Sansa interface. It's never done that before. And even that isn't constant, since sometimes it'll only show the USB plug in RockBox and other times it switches to Sansa interface.

--- End quote ---
Are you sure this is with 3.3? Can you check in System->Rockbox info?

Navigation

[0] Message Index

[#] Next page

Go to full version