Installation / Removal > Sandisk - Installation/Removal

Semi-bricked E260r

(1/2) > >>

Taslow:
I installed Rockbox on my wife's E260r a couple days ago. Everything went very smoothly for a couple days. Seemingly out of the blue, the unit won't start anymore.

The blue ring light comes on, but there is NO display on the screen. I've tried everything from the "turn on hold switch + hold select for 10 seconds and plug in the sansa" to "hold the left button, etc. etc." methods, just to get something, anything to show up on the screen.

I'm out of options here. Any suggestions? We're running Win xp. I can get the unit to turn off by holding the power button for 10 seconds or so, but that's the only action I can get out of it.

I've read other threads about recovery mode and manufacturer's mode, but I'm a little confused about the difference and I can't get any response of any kind from the unit anyway, except the damn blue ring light.
Help!

saratoga:
Open up the player and make sure the memory daughter card hasn't become disconnected.

Taslow:
The 'memory daughter card'? Is that the small black chip I've seen referenced in other threads?

Is this relatively simple to do?

Taslow:
I removed the back panel and pushed in gently on the black square in order to re-seat whatever chip was supposedly loose, but I'm still having the exact same problem.

Any other advice? Damnable glowing blue wheel.  Nothing on the screen; connected, unconnected, etc.


There has to be SOME fix, right?

yapper:
Can you boot into the original Sansa firmware (hold << while booting)? That will rule out any software issue.

Navigation

[0] Message Index

[#] Next page